Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Features
- Improves adhesion
- Enhances hardness
- Nonyellowing and high gloss
- Low water absorption
- Exhibits hydrolytic stability
- Provides excellent chemical and temperature resistance
- Provides alkali resistance
Applications & Uses
- Markets
- Applications
- Cure Method
- Base Chemicals End Uses
- Coating Type
- Applications
- Coatings and inks for steel, plastic, and glass
- Softer, tougher, and more flexible version of BRC-843
- Non yellowing
- Low water absorption
- Alkaline resistance
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 1.1 | g/cm3 | — |
| Durometer Hardness | 70A | — | — |
| Elongation at Break | 230 | % | — |
| Nominal Viscosity (at 60°C) | 22000 | cP | — |
| Nominal Viscosity (at 25°C) | 29000 | cP | — |
| Refractive Index (at 25°C) | 1.479 | — | — |
| Tensile at Break | 6 | MPa | — |
| Glass Transition Temperature (DMA) | -0.15 | °C | — |
| Viscosity (at 60°C) | 33000 | cP | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi** 1,200 2 3,300 1,600 2,800 1,100 Elongation, %** 180 150 3.1 10.8 9.1 130 Elastic Modulus, ksi* 7 45 150 45 70 6 Durometer Hardness 430 600 78D 620 66D 77A Water Absorption, % (24 hrs) 0.41 0.32 0.56 0.66 0.51 3 MEK Double Rubs (#) 66 16 >200 24 45 19 Tg(DMA)=6°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 ABS ** *** *** * *** * Aluminum Cold Rolled Steel
* Glass * HDPE PET * * ** * *** * PMMA * ** ** * ** * Polycarbonate ** *** ** ** *** * Polypropylene * PVC ** *** ** ** *** * Stainless Steel ** * * * Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
Test Formulation Name 130 160 TM50 TP50 H50 HE30 BR-146 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HODA 50 HEMA 30 Omniradw 184 2 2 2 2 2 2 Viscosity, 25C 29,000 4,200 17,000 4,200 1,900 12,000 * Brookfield – CAP 2000+ @ 25°C.
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.
For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
Packaging & Availability
- Packaging Type