Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Features
- Improves the rheological properties of water-based coating systems, particularly at lower shear
- Contributes to obtaining enhanced storage stability for coatings
- Develops a strong pseudoplastic, partly thixotropic flow behavior
- Ameliorates leveling and application properties of paint formulations
- APEO-free
- Tin-free
Applications & Uses
- Coating Type
- Use Level
- 0.1 - 2% (Total paint formulations)
- Dosage
0.1 - 2.0% on total paint formulation.
We recommend the incorporation after dispersing the pigments and fillers, prior to letting down. In critical systems of under low-shear mixing conditions could a pre-dilution in water or a mixture of water/propylene glycol supplementary induce a homogeneous incorporation. For glossy paints preparation, higher amounts are generally needed. The exact amount required for the respective system should be determined in pre-trials.
Properties
- Physical Form
- Appearance
- High-viscous liquid
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 23°C) | 1.06 - 1.10 | g/cm³ | DIN 53217 |
| Non-volatile Content (2g, 3h, 105°C) | 30 - 34 | % | ISO 3251 |
| pH | 6 - 9.5 | — | — |
| Viscosity (at 23°C) | max. 15000 | mPa.s | ISO 3219 (A) |
| Solvent | Water, 1,2 Propanediol | — | — |
Regulatory & Compliance
- Chemical Inventories
Safety & Health
- Safety
- Please refer to our safety data sheet for information relating to product safety.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage
Protect from the effects of weather and store at temperatures between 15 and 30°C. Once opened, containers should be resealed immediately after each removal of the product. At temperatures below 15°C, turbidity, gelling, and gel particles may occur. This effect is reversible and does not influence the product efficiency, so warm up to 50°C and mix well before use.