Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Typical Cured Resin Casting Properties
- Typical Properties
- Blown Film Properties
- Control Properties
- Note
- 1 LDPE: 25 μm thick film, obtained from a 75 mm extruder, with blow up ratio of 2:1, die gap 1 mm and Die rate 1,75 kg/h.cm (MD = Machine Direction and TD = Transversal Direction).
- 2 ND: Not Determined.
- 3 25 μm thick film, temperature: 38° C, 100% RH.
| Value | Units | Test Method / Conditions | |
| Elmendorf Tear Strength (MD) ¹ | Not Determined | gF | ASTM D1922 |
| Value | Units | Test Method / Conditions | |
| C14 Content | min. 95 | % | ASTM D 6866 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength (at Break, MD) ¹ | 25.0 | MPa | ASTM D882 |
| Tensile Strength (at Break, TD) ¹ | 20.0 | MPa | ASTM D882 |
| Elongation (at Break, MD) ¹ | 380.0 | % | ASTM D882 |
| Elongation (at Break, TD) ¹ | 870.0 | % | ASTM D882 |
| Dart Drop Impact Strength ¹ | 70.0 | g/F50 | ASTM D1709 |
| Elmendorf Tear Strength (TD) ¹ | 56.0 | gF | ASTM D1922 |
| Haze ¹ | 8.0 | % | ASTM D1003 |
| Gloss (Angle 60°) ¹ | 76.0 | % | ASTM D2457 |
| Value | Units | Test Method / Conditions | |
| Melt Flow Rate (at 190°C, 2.16kg) | 8.3 | g/10 min | ASTM D1238 |
| Density | 0.918 | g/cm³ | ASTM D1505 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards