I'm green

Braskem America Brand

Products:40

I’m green™ bio-based is the portfolio of products that represents a revolution in the way plastic resins are produced. It is the result of our continuous commitment and investment in innovation and research to find the best solutions to benefit the planet and society.The products under the I’m green™ bio-based brand are produced using sugarcane and capture CO2 from the atmosphere, helping to fight climate change.Combining innovation and sustainable development for a better impact on the planet and society is the ultimate goal.

View All I'm green Products

SBC818

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion, Extrusion Coating, Film Extrusion
Melt Flow Index:8.3 - 8.3 g/10 min

SBC818 is a low-density polyethylene specially formulated for coating processes. This grade exhibits excellent optical properties, minimal neck-in during processing, film stability, and strong adhesion on porous substrates. It does not contain any additives. Moreover, it has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

SBC818R50

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion, Extrusion Coating
Melt Flow Index:8.3 - 8.3 g/10 min

SBC818R50 is a low-density polyethylene specifically designed for coating processes. This grade showcases exceptional optical properties, low neck-in, film stability, and strong adhesion on porous substrates. It is free from additives. Notably, it possesses a minimum carbon biobased content of 50%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SBF0323/12HC

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Film Extrusion, Blown Film Extrusion, Extrusion
Additives Included:Anti-Blocking Agent, Slip Agent
Melt Flow Index:0.32 - 0.32 g/10 min

SBF0323/12HC is a high molecular weight LDPE produced using high-pressure technology. This grade is tailored to deliver exceptional performance in film applications. Films produced with this product exhibit remarkable optical properties, excellent mechanical properties, and good shrinkage characteristics. With a minimum biobased carbon content of 95%, determined according to ASTM D6866, SBF0323/12HC also stands as an environmentally conscious choice for sustainable solutions.

For more information regarding REACH, please visit Braskem's site

SBF0323HC

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion Blow Molding (EBM), Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion, Film Extrusion
Melt Flow Index:0.32 - 0.32 g/10 min

SBF0323HC is a high molecular weight grade produced using high-pressure technology. This product is specifically designed to create films with outstanding mechanical and optical properties. Moreover, it is additives-free and has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SEB853

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Cast Film Extrusion, Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion, Film Extrusion
Melt Flow Index:2.7 - 2.7 g/10 min

SEB853 is a low density polyethylene produced using high-pressure technology. This grade is specifically designed for film applications. Films made with SEB853 exhibit exceptional optical properties, excellent sealability, and low gel content. Additionally, this product is free from additives. With a minimum carbon biobased content of 95%, as determined by ASTM D6866, SEB853 aligns with sustainable practices.

For more information regarding REACH, please visit Braskem's site

SEB853/72

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Cast Film Extrusion, Extrusion
Additives Included:Anti-Blocking Agent, Slip Agent
Melt Flow Index:2.7 - 2.7 g/10 min

SEB853/72 is a high-pressure technology grade known for producing exceptional films with outstanding optical properties, good sealability, and a low gel amount. This product boasts a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SGE7252NS

Polymer Name:Bimodal HDPE
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:2.0 - 2.0 g/10 min

SGE7252NS is a bimodal high density polyethylene designed specifically for manufacturing caps and closures for carbonated soft drinks. This grade offers a well-balanced combination of chemical and mechanical resistance, along with good processability. It contains a minimum biobased content of 96%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SGF4950

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM), Compression Molding, Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion
Melt Flow Index:28.0 - 28.0 g/10 min

SGF4950 is a high-density polyethylene copolymer, designed for the blow-molding segment. It exhibits a well-balanced combination of impact strength, stiffness, and environmental stress cracking resistance, while ensuring excellent processability. This grade contains a minimum biobased carbon content of 96%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SGF4950HS

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Tubing Extrusion, Extrusion Blow Molding (EBM), Compression Molding, Blow Molding
Melt Flow Index:20.0 - 20.0 g/10 min

SGF4950HS is a High Density Polyethylene copolymer that provides a remarkable combination of good processability and excellent stress cracking resistance (ESCR). It is highly recommended for manufacturing containers, flasks, and bottles up to 30 liters for transporting chemical products. This grade has a minimum biobased carbon content of 95%, as determined by ASTM D6866.

SGF4950TT

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Compression Molding, Blow Molding, Extrusion Blow Molding (EBM)
Melt Flow Index:28.0 - 28.0 g/10 min

SGF4950TT is a copolymer high-density polyethylene specifically designed for the blow-molding segment. It does not contain optical brightener in its composition. This grade offers a well-balanced combination of impact and stiffness properties, along with high environmental stress cracking resistance and excellent processability. It has a minimum biobased carbon content of 96%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SGF4960

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM), Compression Molding, Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion
Melt Flow Index:28.0 - 28.0 g/10 min

SGF4960 is a homopolymer high-density polyethylene designed for the blow-molding segment. This product offers a winning combination of high density, stiffness, and exceptional impact resistance, making it ideal for various applications. With a minimum biobased carbon content of 96% (ASTM D6866), it demonstrates Braskem's commitment to sustainability. SGF4960's versatile properties make it well-suited for use in sports and recreation equipment, food and beverage packaging, and toys, among others. Its low carbon content further adds to its appeal as an eco-friendly choice.

SGM9450F

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Film Extrusion, Blown Film Extrusion, Cast Film Extrusion, Extrusion
Melt Flow Index:9.3 - 9.3 g/10 min

SGM9450F is a high‐density polyethylene, developed for the high molecular weight film extrusion segment produced with bimodal technology. The film produced from this resin has high tenacity and excellent resistance to impact characteristics. This resin has wide molar mass distribution that makes it easier to process. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866.

SHA7260

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Fibers Extrusion, Compression Molding, Bicomponent Nonwovens Extrusion
Melt Flow Index:20.0 - 20.0 g/10 min

SHA7260 is a high-density polyethylene specifically designed for injection molding, offering ease of processing and high productivity. This resin exhibits a good melt flow, providing high rigidity and hardness to the molded products. Its narrow molar mass distribution reduces the tendency to warpage. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866.

SHC7260

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:7.2 - 7.2 g/10 min

SHC7260 is a high-density polyethylene tailored for injection molding, offering high hardness and stiffness, along with low warpage tendency. This grade's organoleptic properties make it ideal for water caps applications. Notably, it contains a minimum biobased carbon content of 94%, determined according to ASTM D6866.

SHC7260LS-L

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:7.2 - 7.2 g/10 min

SHC7260LS-L is a high-density polyethylene specially developed for injection molding applications. It offers high hardness and stiffness while exhibiting a low tendency to warp. This resin contains additives to protect against the damaging effects of ultraviolet radiation. With a minimum biobased carbon content of 94%, determined by ASTM D6866, this grade aligns with sustainable practices.

SHD0860

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding
Melt Flow Index:8.0 - 8.0 g/10 min

SHD0860 is a high-density polyethylene developed for injection molding applications. This grade boasts exceptional hardness and stiffness, coupled with minimal warpage during the molding process. With a minimum biobased carbon content of 94% (ASTM D6866), it exemplifies Braskem's commitment to sustainability. Its granule or pellet form ensures ease of handling and processing. Ideal for producing caps, SHD0860 delivers excellent performance as a resin, and its low carbon content makes it an environmentally friendly choice.

For more information regarding REACH, please visit Braskem's site

SHD7255LS-L

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:4.5 - 4.5 g/10 min

SHD7255LS-L is a high-density polyethylene specially designed for injection molding applications. It offers a combination of good tenacity, impact properties, and stiffness. The resin's unique ratio between melt flow and density contributes to excellent mechanical properties. Additionally, this product contains additives that protect against the action of ultraviolet radiation. With a minimum biobased carbon content of 94%, determined according to ASTM D6866, it is an environmentally friendly choice for various molding needs.

For more information regarding REACH, please visit Braskem's site

SHE150

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Fibers Extrusion, Compression Molding, Monofilament Extrusion, Extrusion, Film Extrusion
Additives Included:Antioxidant, Processing Aid
Melt Flow Index:1.0 - 1.0 g/10 min

SHE150 resin is a High Density Polyethylene (HDPE) specifically designed for the monofilament extrusion process. It offers a well-balanced combination of processability, spinnability, and knotting strength, while maintaining minimal gels. Additionally, it contains processing aid and oxidant additives. This grade has a minimum biobased carbon content of 94%, as determined by ASTM D6866. The resin can also be blended with LLDPE to enhance the stiffness of blown films.

SLD4004

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Extrusion Blow Molding (EBM), Compression Molding, Blow Molding, Foam Extrusion, Extrusion, Film Extrusion
Melt Flow Index:2.0 - 2.0 g/10 min

SLD4004 is a low-density polyethylene (LDPE) known for its excellent processability and good mechanical properties. This versatile resin can be utilized in various processing methods, including blow molding, compression molding, extrusion, and foam extrusion. With its low carbon content, SLD4004 aligns with sustainable practices, making it an eco-friendly choice. It excels in producing high-quality films and sheets, offering superior performance as a resin for plastics and elastomers.

For more information regarding REACH, please visit Braskem's site

SLH118

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
Additives Included:Antioxidant
Melt Flow Index:1.0 - 1.0 g/10 min

SLH118 is a Linear Low Density Polyethylene developed specifically for blown film extrusion. Films made with this product exhibit a balanced combination of good processing performance, optical and mechanical properties, and sealability. The resin contains very low gel amount and includes oxidant additives. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SLH218

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion, Coextrusion
Melt Flow Index:2.3 - 2.3 g/10 min

SLH218 is a LLDPE Hexene copolymer, expertly crafted by Braskem. This grade delivers an optimal balance of optical properties, mechanical properties (especially stretchability), sealability, and processability. It contains very low gel content, ensuring smooth processing. With a minimum biobased carbon content of 84%, determined according to ASTM D6866, SLH218 upholds sustainable practices while offering versatile performance in various applications.

SLL118

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
Melt Flow Index:1.0 - 1.0 g/10 min

SLL118 is a Linear Low Density Polyethylene, copolymer of butene-1. This product is specifically designed for blown film extrusion in blends with other polyethylenes. The resulting films exhibit excellent processing performance, balanced optical and mechanical properties, and superior sealability. SLL118 boasts a very low gel amount and includes oxidant additives. Notably, this grade contains a minimum biobased carbon content of 87%, as determined according to ASTM D6866.

SLL118/21

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
Additives Included:Anti-Blocking Agent, Slip Agent
Melt Flow Index:1.0 - 1.0 g/10 min

SLL118/21 is a LLDPE butene copolymer designed to deliver exceptional processing performance. It is tailored for producing films with excellent physical and optical properties, as well as improved sealability. This grade boasts a minimum biobased carbon content of 87%, determined according to ASTM D6866, supporting sustainability efforts in the industry.

For more information regarding REACH, please visit Braskem's site

SLL318

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Cast Film Extrusion, Extrusion, Film Extrusion
Additives Included:Antioxidant
Melt Flow Index:2.7 - 2.7 g/10 min

SLL318 is a linear low density polyethylene, copolymer of butene-1, developed specifically for cast film extrusion applications. Films produced with this product exhibit excellent mechanical properties and enhanced sealability. With a minimum biobased carbon content of 87%, as determined by ASTM D6866, this grade aligns with sustainable practices. Additionally, it contains oxidant additives to further enhance its performance.

SLL5405S

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blown Film Extrusion, Extrusion, Film Extrusion
Additives Included:Anti-Blocking Agent, Slip Agent
Melt Flow Index:1.0 - 1.0 g/10 min

SLL5405S is a LLDPE Butene copolymer designed and produced by Braskem. This versatile product offers a great balance between processing performance, mechanical properties, and sealability. It exhibits very low gel amount, ensuring high-quality results. The minimum biobased carbon content of this grade is 87%, determined according to ASTM D6866.

SPB208

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion, Injection Molding
Melt Flow Index:22.0 - 22.0 g/10 min

SPB208 is a low density polyethylene (LDPE) specially designed for injection molding applications. With excellent processability and low viscosity during processing, it is ideal for products that require flexibility. This grade is additives-free and boasts a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SPB608

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion, Injection Molding
Melt Flow Index:30.0 - 30.0 g/10 min

SPB608 is a low-density polyethylene (LDPE) specially designed for injection molding applications. With excellent processability and low viscosity during processing, it is ideal for products that require flexibility. Injection molded products made with this resin exhibit good flexibility. This grade is additives-free and boasts a minimum carbon biobased content of 95%, as determined by ASTM D6866.

SPB681

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Injection Molding, Film Extrusion
Melt Flow Index:3.8 - 3.8 g/10 min

SPB681 is a low density polyethylene specifically developed for film extrusion applications. With outstanding processability, this resin ensures excellent stability in producing thin films. The films obtained with SPB681 exhibit exceptional optical properties, making it ideal for various film-related industries. Furthermore, this grade boasts a minimum carbon biobased content of 95%, confirming its commitment to sustainability.

For more information regarding REACH, please visit Braskem's site

SPB681/59

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
Additives Included:Anti-Blocking Agent, Slip Agent
Melt Flow Index:3.8 - 3.8 g/10 min

SPB681/59 is a low density polyethylene produced under high-pressure technology. This grade is specifically designed for film extrusion applications. Films obtained with this product exhibit excellent "draw down," displaying good sealability and adhesion on paper substrates, while maintaining low gel content. The minimum carbon biobased content of this grade is 95%, determined according to ASTM D6866.

STN7006

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Blow Molding, Extrusion, Profile Extrusion, Film Extrusion, Coextrusion
Melt Flow Index:0.6 - 0.6 g/10 min

STN7006 is a low-density polyethylene (LDPE) designed specifically for coextruded films and lamination. This resin offers a remarkable combination of mechanical, optical, and stiffness properties. With low gels content, it ensures the production of films with excellent appearance. STN7006 is identified as PE 114 per ASTM D-4976-04a standard specifications and is free from additives. Notably, this grade contains a minimum of 95% carbon biobased content, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

STS7006

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Blow Molding, Extrusion, Film Extrusion, Coextrusion
Additives Included:Anti-Blocking Agent, Slip Agent
Melt Flow Index:0.6 - 0.6 g/10 min

STS7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin offers an excellent combination of mechanical, optical, and stiffness properties. STS7006 boasts low gels content, ensuring the production of films with a superior appearance. This product is identified as PE 114 according to ASTM D-4976-04a standard specifications. Notably, it contains a minimum of 95% carbon biobased content, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SVT2145R

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Compression Molding, Rotational Molding, Extrusion, Injection Molding
End Uses:Profiles, Automotive Components
Melt Flow Index:2.1 - 2.1 g/10 min

Braskem America SVT2145R is an ethylene-vinyl acetate copolymer-based resin that offers easy crosslinking and high compatibility with other thermoplastic resins, inorganic fillers, and pigments. Compositions with SVT2145R exhibit remarkable flexibility and fatigue resistance. When cross-linked, the compound demonstrates exceptional abrasion resistance and a high friction coefficient. This grade contains a minimum biobased carbon content of 45%, as determined by ASTM D6866.

SVT2180

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Compression Molding, Injection Molding
Additives Included:Antioxidant
End Uses:Foams, Toys, Unisole, Sporting Goods, Shoe Sole, Plates, Midsole
Melt Flow Index:2.1 - 2.1 g/10 min

Braskem America SVT2180 is a copolymer of renewable ethylene with Vinyl Acetate (EVA) mainly used for the production of crosslinked foam sheets and other parts. It is a product with easy processability and high compatibility with mineral fillers, thermoplastics, and elastomeric resins. Other important characteristics are elasticity, flexibility, excellent stress cracking resistance (ESCR), chemical resistance, and low temperature strength. The exclusive morphologic characteristics give outstanding crosslinkability. The components produced with SVT2180 have the following properties: low weight, resistance to deformation, low shrinkage, high capacity of shrinkage, and color retention. The minimum biobased carbon content of this grade is 80%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site