Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Typical Properties
- Blown Film Properties
- Control Properties
- Note
Blown Film Properties:
- 40 μm thickness film in a 75mm screw diameter extruder with blow up ratio of 2.2:1. (MD: Machine Direction; TD: Transversal Direction)
| Value | Units | Test Method / Conditions | |
| C14 Content | min. 95 | % | ASTM D 6866 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength (at Break, MD) ¹ | 25.0 | MPa | ASTM D882 |
| Tensile Strength (at Break, TD) ¹ | 20.0 | MPa | ASTM D882 |
| Elongation (at Break, MD) ¹ | 350.0 | % | ASTM D882 |
| Elongation (at Break, TD) ¹ | 1050.0 | % | ASTM D882 |
| Dart Drop Impact Strength ¹ | 80.0 | g/F50 | ASTM D1709 |
| Elmendorf Tear Strength (MD) ¹ | 580.0 | gF | ASTM D1922 |
| Elmendorf Tear Strength (TD) ¹ | 210.0 | gF | ASTM D1922 |
| Haze ¹ | 7.0 | % | ASTM D1003 |
| Gloss (Angle 60°) ¹ | 75.0 | % | ASTM D2457 |
| Value | Units | Test Method / Conditions | |
| Melt Flow Rate (at 190°C, 2.16kg) | 2.7 | g/10 min | ASTM D1238 |
| Density | 0.923 | g/cm³ | ASTM D1505 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards