Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Braskem America Company Logo

SGF4960

1 of 41 products in this brand
SGF4960 is a homopolymer high-density polyethylene designed for the blow-molding segment. This product offers a winning combination of high density, stiffness, and exceptional impact resistance, making it ideal for various applications. With a minimum biobased carbon content of 96% (ASTM D6866), it demonstrates Braskem's commitment to sustainability. SGF4960's versatile properties make it well-suited for use in sports and recreation equipment, food and beverage packaging, and toys, among others. Its low carbon content further adds to its appeal as an eco-friendly choice.

For more information regarding REACH, please visit Braskem's REACH site

Polymer Name: High Density Polyethylene (HDPE), High Density Polyethylene (HDPE) Compound

Processing Methods: Blow Molding, Compression Molding, Extrusion, Extrusion Blow Molding (EBM), Profile Extrusion, Tubing Extrusion

Melt Flow Index: 28.0 - 28.0 g/10 min

Technical Data SheetSafety Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Polyethylenes,

Polyolefins

Polymer Name

High Density Polyethylene (HDPE),

High Density Polyethylene (HDPE) Compound

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Features & Benefits

Labeling Claims

Bio-based,

Low Carbon Footprint (PCF),

Sustainable,

Sustainable Polyethylene

Materials Features

High Density,

High Impact Resistance,

High Stiffness,

Low Carbon Content

Applications & Uses

Markets

Consumer Goods,

Printing & Packaging

Applications

Printing & Packaging — Packaging

Food & Beverage Packaging,

Non-Food Consumer Packaging

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Beverage Bottles,

Bottles,

Caps,

Closures,

Containers,

Cosmetic Packaging,

Cosmetics Bottles,

Food Packaging,

Jugs,

Rigid Packaging,

Toys,

Tubes

Plastics & Elastomers Processing Methods

Blow Molding,

Compression Molding,

Extrusion,

Extrusion Blow Molding (EBM),

Profile Extrusion,

Tubing Extrusion

Properties

Typical Properties
ValueUnitsTest Method / Conditions
C14 Contentmin. 96%ASTM D 6866
Control Properties
ValueUnitsTest Method / Conditions
Melt Flow Rate (at 190°C, 2.16kg)0.34g/10 minASTM D1238
Density0.962g/cm³ASTM D792
Typical Properties - Plaque Properties
ValueUnitsTest Method / Conditions
Melt Flow Rate (at 190°C, 21.6kg)28.0g/10 minASTM D 1238
Tensile Strength (at Yield) ᵃ30.0MPaASTM D 638
Tensile Strength (at Break) ᵃ30.0MPaASTM D 638
Flexural Modulus (1% Secant) ᵇ1550.0MPaASTM D 790
Tensile Impact Strength (at 23°C)90.0kJ/m²ISO 8256
Deflection Temperature Under Load (at 0.455 MPa) ᵇ70.0°CASTM D 648
Vicat Softening Temperature (at 10 N) ᵇ132.0°CASTM D 1525
Note

Typical properties correspond to average values obtained in our laboratories. Test specimens prepared from compression molded sheet made according to ASTM D 4703. Thickness of test piece: a) 2 mm; b) 3 mm.

Regulatory & Compliance

Certifications & Compliance

Comprehensive Environmental Response, Compensations & Liability Act (CERCLA),

SARA 313

Chemical Inventories

TSCA (USA)

Quality Standards

In Preview