Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Typical Properties
- Control Properties
- Typical Properties - Blown Film Properties
- Note
Blown Film Properties:
- Film with 12,5 microns produce in a 75mm extruder with 1,3 mm of die gap and a blow‐up ra o of 4.5:1. (MD = extrusion direction and TD = transversal direction).
| Value | Units | Test Method / Conditions | |
| C14 Content | min. 96 | % | ASTM D 6866 |
| Value | Units | Test Method / Conditions | |
| Melt Flow Rate (at 190°C, 5kg) | 0.33 | g/10 min | ASTM D 1238 |
| Melt Flow Rate (at 190°C, 21.6kg) | 9.3 | g/10 min | ASTM D1238 |
| Density | 0.952 | g/cm³ | ASTM D792 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength (at Break, MD) | 85.0 | MPa | ASTM D882 |
| Tensile Strength (at Break, TD) | 45.0 | MPa | ASTM D882 |
| Elongation (at Break, MD) | 590.0 | % | ASTM D882 |
| Elongation (at Break, TD) | 740.0 | % | ASTM D882 |
| Tensile Strength (at Yield, MD) | 40.0 | MPa | ASTM D882 |
| Tensile Strength (at Yield, TD) | 30.0 | MPa | ASTM D882 |
| Elongation (at Yield, MD) | 15.0 | % | ASTM D882 |
| Elongation (at Yield, TD) | 5.0 | % | ASTM D882 |
| Dart Drop Impact Strength | 200.0 | g/F50 | ASTM D1709 |
| Elmendorf Tear Strength (MD) | 5.0 | gF | ASTM D1922 |
| Elmendorf Tear Strength (TD) | 50.0 | gF | ASTM D1922 |
| Secant Modulus 1% (MD) | 750.0 | MPa | ASTM D882 |
| Secant Modulus 1% (TD) | 870.0 | MPa | ASTM D882 |
| Sealing Initial Temperature | 125.0 | °C | Braskem Method |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards