Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Braskem America Company Logo

SHE150

1 of 41 products in this brand
SHE150 resin is a High Density Polyethylene (HDPE) specifically designed for the monofilament extrusion process. It offers a well-balanced combination of processability, spinnability, and knotting strength, while maintaining minimal gels. Additionally, it contains processing aid and oxidant additives. This grade has a minimum biobased carbon content of 94%, as determined by ASTM D6866. The resin can also be blended with LLDPE to enhance the stiffness of blown films.

For more information regarding REACH, please visit Braskem's REACH site

Polymer Name: High Density Polyethylene (HDPE), High Density Polyethylene (HDPE) Compound

Processing Methods: Blown Film Extrusion, Cast Film Extrusion, Compression Molding, Extrusion, Fibers Extrusion, Film Extrusion, Monofilament Extrusion

Additives Included: Antioxidant, Processing Aid

Melt Flow Index: 1.0 - 1.0 g/10 min

Technical Data SheetSafety Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Additives Included

Antioxidant,

Processing Aid

Chemical Family

Polyethylenes,

Polyolefins

Polymer Name

High Density Polyethylene (HDPE),

High Density Polyethylene (HDPE) Compound

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Features & Benefits

Labeling Claims

Bio-based,

Low Carbon Footprint (PCF),

Sustainable,

Sustainable Polyethylene

Materials Features

Good Balance of Knotting Strength,

Good Processability,

Good Spinning Characteristics,

Good Stiffness,

Low Carbon Content,

Low Gel

Applications & Uses

Markets

Printing & Packaging

Applications

Printing & Packaging — Packaging

Food & Beverage Packaging

Compatible Polymers & Resins

Linear Low Density Polyethylene (LLDPE)

Plastics & Elastomers End Uses

Bags,

Blown Films,

Cast Films,

Cereal Bags,

Film,

Food Packaging,

Raschel,

Rope,

Shade Net,

Strings

Plastics & Elastomers Processing Methods

Blown Film Extrusion,

Cast Film Extrusion,

Compression Molding,

Extrusion,

Fibers Extrusion,

Film Extrusion,

Monofilament Extrusion

Properties

Physical Form

Granules,

Microgranule,

Pellets,

Solid

Typical Properties
ValueUnitsTest Method / Conditions
C14 Contentmin. 94%ASTM D 6866
Control Properties
ValueUnitsTest Method / Conditions
Melt Flow Rate (at 190°C, 2.16kg)1.0g/10 minASTM D1238
Density0.948g/cm³ASTM D792
Typical Properties - Plaque Properties
ValueUnitsTest Method / Conditions
Tensile Strength (at Yield) ᵃ28.0MPaASTM D638
Tensile Strength (at Break) ᵃ40.0MPaASTM D638
Flexural Modulus (1% Secant) ᵇ1280.0MPaASTM D2240
Hardness ᶜ62.0—ASTM D2240
Deflection Temperature Under Load (at 0.455 MPa) ᵇ76.0°CASTM D648
Vicat Softening Temperature (at 10 N) ᵇ128.0°CASTM D1525
Note

Typical Properties - Plaque Properties:

  • Test specimens from compression molded plaque according to ASTM D4703. Plaque Thickness: a) 2mm. b) 3mm c) 6mm. NB = No break

Regulatory & Compliance

Certifications & Compliance

Comprehensive Environmental Response, Compensations & Liability Act (CERCLA),

EC No.1907/2006

Chemical Inventories

AICS (Australia),

DSL (Canada),

ENCS (Japan),

IECSC (China),

ISHL (Japan),

KECI (Korea),

NCI (Vietnam),

NZIoC (New Zealand),

PICCS (Phillipines),

TCSI (Taiwan),

TSCA (USA)

Quality Standards

In Preview