SLH218

Identification & Functionality

Chemical Family

Polyethylenes,

Polyolefins

Polymer Name

Linear Low Density Polyethylene (LLDPE)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Features & Benefits

Labeling Claims

Bio-based,

Low Carbon Footprint (PCF),

Sustainable,

Sustainable Polyethylene

Materials Features

Excellent Sealability,

Good Mechanical Properties,

Good Optical Properties,

Good Processability,

Good Stretchability,

Low Carbon Content,

Low Gel

Applications & Uses

Markets

Building & Construction,

Electrical & Electronics,

Printing & Packaging

Applications

Building & Construction — Building Materials

Pipes & Plumbing

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Electrical & Electronics — Wire & Cable

Jacketing & Insulation

Compatible Polymers & Resins

High-Density Polyethylene (HDPE),

Low-Density Polyethylene (LDPE),

Polyethylene Cross-Linked (PEX)

Plastics & Elastomers End Uses

Blown Films,

Cable Insulation,

Cables,

Cast Films,

Cosmetic Packaging,

Electrical Insulation,

Film,

Flexible Packaging,

Irrigation Pipes,

Liners,

Pipes,

Piping,

Stretch Films,

Tubular Film,

Wires

Plastics & Elastomers Processing Methods

Blown Film Extrusion,

Cast Film Extrusion,

Coextrusion,

Extrusion,

Film Extrusion

Properties

Physical Form

Pellets,

Solid

Typical Properties

	Value	Units	Test Method / Conditions
C14 Content	min. 84	%	ASTM D 6866

Blown Film Properties

	Value	Units	Test Method / Conditions
Highlight ‐ Ul Mate Test ¹ ²	400.0	%	ASTM D4649
Highlight ‐ Puncture ¹ ²	2.6	kg	ASTM D4649
Highlight ‐ Retention Maximum Force ¹ ²	3.1	kg	ASTM D4649
Highlight ‐ Retention Ending Force ¹ ²	2.0	kg	ASTM D4649
Highlight ‐ Retention Loss ¹ ²	35.0	%	ASTM D4649
Highlight ‐ Cling ¹ ²	29.0	g	ASTM D4649
Highlight ‐ Unwind Force ¹ ²	3.7	kgf	ASTM D4649
Highlight ‐ Sond level ¹ ²	73.0	dB	ASTM D4649
Highlight ‐ Elongation Force ¹ ²	34.0	kgf	ASTM D4649
Haze	3.0	%	ASTM D1003
Gloss (Angle 45°)	95.0	%	ASTM D2457
Tensile Strength (at Break, MD) ᵃ	40.0	MPa	ASTM D882
Tensile Strength (at Break, TD) ᵃ	40.0	MPa	ASTM D882
Elongation (at Break, MD) ᵃ	1170.0	%	ASTM D882
Elongation (at Break, TD) ᵃ	1500.0	%	ASTM D882
Tensile Modulus (1% Secant, MD) ᵃ	210.0	MPa	ASTM D882
Tensile Modulus (1% Secant, TD) ᵃ	240.0	MPa	ASTM D882
Dart Drop Impact Strength ᵃ	110.0	g/F50	ASTM D1709
Elmendorf Tear Strength (MD) ᵃ	240.0	gF	ASTM D1922
Elmendorf Tear Strength (TD) ᵃ	520.0	gF	ASTM D1922

Control Properties

	Value	Units	Test Method / Conditions
Melt Flow Rate (at 190°C, 2.16kg)	2.3	g/10 min	ASTM D1238
Density	0.916	g/cm³	ASTM D1505

Note

• ⁽¹⁾ 23μm thickness film, processed in a 3 layer coextruder
• ⁽²⁾ Highlight tested at 300%
• ^a Film with 38 microns produce in a 40mm extruder and a blow‐up ratio of 2.2:1. (MD = extrusion direction and TD = transversal direction).

Regulatory & Compliance

Certifications & Compliance

EC No.1907/2006

Chemical Inventories

IECSC (China),

TSCA (USA),

TSCA Exempt (USA)

Quality Standards

In Preview