Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Typical Properties
- Blown Film Properties
- Control Properties
- Note
Blown Film Properties:
- Film with 40 microns produce in a 40mm extruder and a blow‐up ratio of 2.2:1. (MD = extrusion direction and TD = transversal direction).
| Value | Units | Test Method / Conditions | |
| C14 Content | min. 84 | % | ASTM D 6866 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength (at Break, MD) | 40.0 | MPa | ASTM D882 |
| Tensile Strength (at Break, TD) | 40.0 | MPa | ASTM D882 |
| Elongation (at Break, MD) | 1080.0 | % | ASTM D882 |
| Elongation (at Break, TD) | 1360.0 | % | ASTM D882 |
| Flexural Modulus (1% Secant, MD) | 200.0 | MPa | ASTM D882 |
| Flexural Modulus (1% Secant, TD) | 210.0 | MPa | ASTM D882 |
| Dart Drop Impact Strength | 150.0 | g/F50 | ASTM D1709 |
| Elmendorf Tear Strength (MD) | 300.0 | gF | ASTM D1922 |
| Elmendorf Tear Strength (TD) | 510.0 | gF | ASTM D1922 |
| Value | Units | Test Method / Conditions | |
| Melt Flow Rate (at 190°C, 2.16kg) | 1.0 | g/10 min | ASTM D1238 |
| Density | 0.916 | g/cm³ | ASTM D1505 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards