Brands

Disponil® grades are anionic based surfactants for a wide range of applications where dynamic wetting and solubilising properties are needed. Especially their strong emulsifying and dispersing characteristics are the main property in diverse applications. They are used during the polymerization process are essential for problem-free manufacture, insitu-polymerization stabilization and can also positively influence the dispersion performance in application. Disponil® grades are free of sodium chloride and the remaining salt content of sodium sulfate is reduced to a very low limit. With regard to the 1,4 Dioxan content in fatty alcohol ether sulfates (FES) the level is reduced to a limit depending on the ethoxylation degree. Overall the content is below 150 ppm, whereas the lowest is < 5ppm. Those narrow ranged by-products of the main product are mandatory in sensitive applications like emulsion polymerisation processes. In addition most of the emulsifiers are FDA or BfR (Bundesinstitut für Risikobewertung) approved.

Acronal® is a range water-based emulsions. Acronal® range for exterior paints covers styrene and pure acrylics which offer a very high durability against the influence of weathering. Acronal® range for wood and trim paints offer a very high durability against the influence of weathering. In addition, our styrene acrylics have an outstanding chemical resistance, which is very important for exterior applications. BTC’s range of Acronal® dispersions covers both selfcrosslinking and non selfcrosslinking dispersions. BTC’s range of Acronal® types give decorative foils, filters and wallpaper excellent mechanical properties. In air and oil filters for the automotive industry they improve durability and performance. In high-quality decorative paper foil, our binders ensure a high level of stability of the bonded fibers. To abrasives our binders ensure the abrasives flexibility and reduce abrasive particle wear. BTC’s Acronal® types for natural fibers are acrylic dispersions. BTC’s range of Acronal® types give nonwovens made of synthetic fibers their exceptional and different functional properties.

Sokalan® range comprises dispersing agents that are used to eliminate or reduce the impact of water hardness ions during the application of the detergent or cleaning formulation. State-of-the-art laundry formulations consist of sodium polyacrylates, like our Sokalan® types.

Trilon® is a broad product range of high-performance and innovative complexing agents, also known as chelating agents. Trilon® chelating agents belong mainly to the class of amino carboxylates which are organic complexing agents. Chelating agents are able to prevent the deleterious impact of metal ions in technical applications. The presence of free metal ions, such as iron, copper, calcium, manganese, and further other metals, reduces the efficiency or quality of the product due to their catalytic activity, precipitation, or increased microbial growth. Trilon® chelating agents are applied in the manufacture of pulp- and paper, electronic or chemical surface treatment processes, bleaching processes in the textile/leather industry, and versatile chemical processes where metal ions can negatively impact the process.

Tamol® grades are used as dispersants that offer specialized properties making them ideal for improving electroplating processes. Tamol® product range of BASF, BTC offers products for stabilization and dispersion of aqueous dispersions and emulsions as well as scale inhibitors and inhibitors for dye transfer.

MagnaPearl® is a range of mica-based titanium-coated pigments that exhibit a high degree of whiteness combined with brilliance and hiding. They are available in a wide variety of particle sizes creating extraordinary optical effects ranging from a fine-grained luster to a bold silvery-white sparkle. MagnaPearl® effect pigments are pearlescent pigments that are specially engineered. They are available in a variety of particle sizes. BTC’s effect pigments find use in a wide field for the coloration of plastics. They are also suitable for a variety of other industries including the automotive industry as well as the agriculture, building & construction, electrical & electronics, packaging, and textiles & fibers industries. They find also applications in newly emerging markets.

Hydropalat® from BTC types are used as wetting agents and surface modifiers. They provide a formulation with adequate wetting properties, enhance different component compatibility and/or improve the appearance of a coated surface in furniture & floorings coatings, automotive & industrial coatings, inks & printing applications.

Lupasol® performance polymers are water soluble polymers. They are either homopolymers or copolymers of various polymers. Depending on their structure such polymers are anionic, nonionic, or cationic charged. They act mainly as additional additive due to their key performance. Lupasol® paper chemicals are components for the production of microcapsules which, in combination with other chemicals, give a highly efficient reactive system to produce carbonless copy papers.

Pluronic® types are chemically EO/PO or PO/EO block polymers used as dispersants. Pluronic® grades offer specialized properties making them ideal for improving electroplating processes.

FoamStar® products are used as defoamers. BTC’s FoamStar® defoamers suppress and destroy foam and its negative effects during inks and printing applications. By removing or inhibiting air bubbles they are important process aids throughout the production as well as the applications process. Manufacturers benefit from foam-free production processes by reaching their desired results much quicker.

Dehypon® grades are oleochemical sourced fatty alcohol alkoxylates. They are special grades which provide very low foaming properties. The physical form vary from liquid to solid, even granules are available. Dehypon® grades are versatile useable and provide properties such as wetting, soil removal, low foaming and emulsification. Dehypon® low foaming surfactants are used in versatile chemical-technical applications to ensure a smooth process flow. Application fields are besides others in the paper & pulp industry or in the metal treatment industry, especially in metalworking fluids. Also in the wood based fiber production, in textile pre-treatment and in coatings formulations BTC’s low foaming surfactants are used.

Plurafac® grades are fatty alcohol alkoxylates. They are petrochemically sourced and are low-foaming nonionic surfactants. They consist of alkoxylated, predominantly unbranched fatty alcohols, and they contain higher alkene oxides alongside ethylene oxide. The fatty alcohol chains of some Plurafac® types terminate in an alkyl group. Their most important properties are wetting, low-foaming, or even defoaming. They are used in versatile chemical-technical applications to ensure a smooth process flow. BTC’s low-foaming surfactants are used in the paper & pulp industry or in the metal treatment industry, especially in metalworking fluids. Also in wood-based fiber production, textile pre-treatment, and coatings formulations.

Acrodur® acrylic resins are available as an aqueous solution. They are self-cross-linking and without formaldehyde release. BTC’s range of Acrodur® types gives decorative foils, filters, and wallpaper excellent mechanical properties. Acronal® types with specific properties give the best performance for mineral, glass fibers, and natural fibers (acrylic resins as a binding agent). Acronal® latexes are based on styrene-acrylate polymers and provide optimum printability and low yellowing tendency.

Poligen® wax types refer to pure waxes of oxidized polyethylene waxes or ethylene copolymers. Poligen® products are already emulsified waxes and are used for ready-to-formulate purposes. The oxidized ethylene polymers provide the property of emulsification and thus wax emulsions can be prepared. They are defined by their mechanical and physical properties. The chemical constitution is mainly different. Oxidized polyethylene waxes are of high hardness and higher molar mass.

Emuldur® products are polyurethane dispersions. BTC’s Emuldur® range gives nonwovens made of synthetic fibers their exceptional and different functional properties.

Pluriol® grades are polyalkylene glycols or modified (alkyl) polyalkylene glycols. Pluriol® grades offer specialized properties making them ideal for improving electroplating processes.