Products

CIM® 1000 Trowel Grade Trowel Grade is a tough, liquid applied, two component, chemical and corrosion resistant urethane elastomeric coating, chemically thickened to allow trowel applications with minimum sag. CIM 1000 Trowel Grade is designed for use with all CIM materials. CIM 1000 Trowel Grade can be used as a crack filler or for application to vertical surfaces and corner flashings. CIM 1000 Trowel Grade offers the same advantages as CIM 1000 and is approved for contact with potable water in accordance with ANSI/NSF 61. CIM 1000 Trowel Grade may be applied at thicknesses up to 250 mils on vertical surfaces in one coat.

Tapecoat® 7100 Wet Bond Epoxy is a two-part 100% solids epoxy.

Chase Corporation Roybond 747 is a single component primer for Greenline and Handy Cap.

Chase Corporation Plasgard 410 Epoxy Coating is a two-part, high-build, solvent-free epoxy coating.

CIM® 500 is a tough, durable, waterproofing coating specifically formulated to meet the demands of waterproofing for buried, non-UV exposed, or below grade applications. This two-component, liquid applied urethane coating adheres to most materials to form a permanent, seamless barrier to water. It is especially well suited for plaza decks, areas with multiple penetrations and curbs, and between-slab waterproofing.

Tapecoat® 7030 High-Build Epoxy FS Fast-Set Epoxy is a two-part, 100% solids fast curing epoxy.

CIM® 1000 is a liquid applied urethane coating that cures in hours to form a tough elastomeric coating that adheres to most substrates, forming a chemical and abrasion resistant barrier for waterproofing, corrosion protection, and containment of water and most aqueous chemicals.

Chase Corporation Omniprime is a single component universal primer which can be used with Tapecoat cold or hot applied tapes.

CIM® 800 is a tough, weather durable, waterproofing coating specifically formulated to meet the demands of waterproofing above or below grade. This two component, cold, liquid applied urethane coating adheres to most materials to form a permanent seamless barrier to water. It is especially well suited for roofs over critical spaces (e.g. clean rooms, control rooms), green roofs, plaza decks, areas with multiple penetrations and curbs, and between-slab waterproofing.

Tapecoat® 7000 Epoxy is a two-part high-temperature epoxy.

Tapecoat® 7025 EZ Flow Epoxy is a two-part easy to apply all-purpose epoxy coating.

Chase Corporation Primer B400 is designed to be used with Servi wrap bitumen tapes, except for M30 and Outer wrap.