Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Characteristics
- Waterborne mixture of proprietary surfactants.
- Benefits
- Safe, easy-to-use
- Non-bleach odor
- Interior/Exterior use
- VOC compliant
- Safe on glass when used correctly
- Wide variety of use
- Excellent on brick and concrete
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Uses
iRestore can be used horizontal concrete surfaces. Coverage rates vary from 50-300 sq. ft. per gallon, depending on surface porosity and texture.
- Usage
- Brick, concrete, precast, limestone, sandstone, exposed aggregate, granite, unpolished marble, synthetic stone, terrazzo, anodized aluminum, EIFS, uncoated stainless steel, roofs and glass.
- Before Using
- Read entire label, tech data and MSDS. Contains hydrochloric acid. Use adequate ventilation. Avoid breathing of vapor or spray mist. Precautions must be taken to avoid exposing building occupants to fumes above permissible exposure limits (PEL) for product. Keep container closed when not in use. In case of FIRE, extinguish with foam, CO2, dry chemical, water fog or spray. Do not reuse container.
- Protective Equipment
- Always wear gloves and goggles when handling this product. Rain suit of plastic, rubber, or PVC boots and gloves, face shields, and goggles. Use respiratory protection in accordance with OSHA Standards and Local Codes.
- Spills and Disposal
- Large spill: Dike and contain for intended use. Small spill: Soak up with an absorbent and place in approved container for disposal. Check state, local, or federal regulations for your area for waste disposal. Check for adequate ventilation to maintain PEL.
- Preparation
- Fully protect all adjacent and surrounding surfaces including foliage, vegetation, surrounding buildings, metal and painted surfaces during the cleaning process. Cover landscaping using plastic or wet the foliage with water before and after the cleaning process. Clean when traffic is at a minimum, divert or block area if needed. iRestore should be applied when surface and air temperatures are 40° F or above. If freezing has occurred, allow the masonry to thaw completely before application. If temperatures exceed 90° F always pre-wet the surface with fresh water before application. Do not allow iRestore™ to dry on the surface.
- Limitations
- Do not allow solution to dry on the surface. Do not use on polished marble. Do not use on copper, brass or bronze. Always test prior to use.
- Limited Warranty
- Chemical Products Industries, Inc. warrants this product to be free from defects. Chemical Products Industries, Inc. shall not be held responsible in any manner for any personal injury or property damage or other type of loss resulting from, or related to, the handling, storage, or use of this material. Since Chemical Products Industries, Inc. shall have no control of the use of this product described herein Chemical Products Industries, Inc assumes no liability for loss or damage incurred from the improper use of such product.
Properties
- Physical Form
- Odor
- Slightly acrid
- Soluble in
- Water
- Typical Properties
| Value | Units | Test Method / Conditions | |
| pH | 2 | — | — |
| Density | 1.14 | g/cc | — |
| VOC | Federal EPA Compliant | — | — |
Regulatory & Compliance
- Chemical Inventories
Technical Details & Test Data
- Coverage
- Generally, one gallon of material will treat 50-300 sq. ft. per gallon. Coverage rates will vary depending on surface texture, porosity and severity of stain.
- Always Test
- in an inconspicuous area, to determine the suitability of the product for the intended use. Clean tools, equipment with fresh water. Water flush all primary surfaces, shrubbery, sidewalks, blacktop, asphalt, glass, equipment and all adjacent surfaces.
- Technical Service
- Technical service engineers and chemists are available to answer questions on product performance, application methods and chemical composition.
Safety & Health
- First Aid
- Do not get in eyes, on skin or clothing. Wash clothing before re-use. In case of contact: For eyes, immediately flush with water for 15 minutes. Call a physician. For skin, flush with soap and water. Wash clothes before reuse. If inhaled, remove to fresh air. Call a physician. If swallowed, drink water, do not induce vomiting, call a physician immediately. For additional information, consult the MSDS for this product.
Packaging & Availability
- Regional Availability
- Container Info
- 1 gal.
- 5 gal. Pail(s)
- 55 gal. Drum(s)
Storage & Handling
- Storage & Stability
- iRestore has a shelf life of at least 12 months at temperature between 0 C and 30 C. Protect the containers against light. After 12 months from the product purchase date, testing is required to verify the product is still active. Do not allow product to freeze. Freezing could decrease shelf life substantially. If the material is kept beyond the shelf life recommended, it is not necessarily unusable, but a quality control should be performed on the properties relevant to the application.