Products

TZ-Paint Prep™ is a waterborne high performance blend of anionic and nonionic surface active agents that will remove oil, grease and dirt residue from any washable surface. It is biodegradable, non-hazardous and VOC compliant. TZ-PAINT PREP™ is formulated for quick, thorough lifting and suspension of contaminants for easy rinsing. TZ-PAINT PREP™ has undergone years of field trials and testing to meet government regulations for safe, non-toxic chemicals and is authorized by the USDA for use in federally inspected meat and poultry plants.

TZ-Floor Prep™ is a waterborne high performance blend of anionic and nonionic surface active agents that willre- move oil, grease and dirt residue from any washable surface. It is biodegradable, non-hazardous and VOC compliant. TZ-FLOOR PREP™ is formulated for quick, thorough lifing and suspension of contaminants for easy rinsing.TZ-FLOOR PREP™ has undergone years of field trials and testing to meet government regulations for safe, non-toxic chemicals and is authorized by the USDA for use in federally inspected meat and poultry plants.

CP-1007™ is a non-flammable, non-toxic, non-acid, penetrating silicate sealer that strengthens and internally waterproofs cementious materials. CP-1007 is water-based and environmentally friendly. Unlike membrane forming sealers which can be worn away in high traffic areas’, leaving unprotected concrete unsightly and susceptible to chemical attack, CP-1007 penetrates into the surface and cannot be scratched or peeled off. When applied to concrete or masonry, CP-1007 reacts with calcium hydroxide and reduces porosity and permeability of the concrete matrix. This serves to increase the hardness and chemical resistance which, in turn, increases the service life of the surface. In conditions where salt air and humidity attack the concrete, causing oxidation of the reinforcing steel, CP-1007 has proved to halt such corrosion activity. When the CP-1007 is applied to concrete exposed to such conditions, exfoliation or expulsion of the chlorides takes place. The CP-1007 reacts with free alkali in the concrete forming a silica hydrogel that fills the capillaries within the matrix. This hydrogel waterproofs and seals the surface after all materials harmful to the concrete are removed. This process could take up to thirty days or longer, depending on the chloride and acidic residual concentration within the capillaries.

An odorless, water based solution of potassium methyl siliconate developed to effectively treat a wide range of natural stone and masonry surfaces. CP-1000 provides long-lasting protection without altering the natural appearance of the substrate.

CP-500W™ is a one component, VOC compliant, penetrating water repellent which contains a proprietary modified siloxane. This water-based siloxane penetrates most masonry and concrete pores and capillaries up to ¼ inch or more depending on surface porosity and moisture content at the time of application. CP-500W reacts with the silica in concrete and masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process allow CP-500W to become integral part of the substrate and provide long-term water repellent protection.

TERAZYME GP™ is a waterborne high performance blend of anionic and nonionic surface active agents that will remove oil, grease and dirt residue from any washable surface. It is biodegradable, non-hazardous and VOC compliant. TERAZYME GP™ is formulated for quick, thorough lifting and suspension of contaminants for easy rinsing. TERAZYME GP™ has undergone years of field trials and testing to meet government regulations for safe, non-toxic chemicals and is authorized by the USDA for use in federally inspected meat and poultry plants.

SW-244-40 VOC™ is a DOT grade clear, penetrating 40% alkylalkoxysilane water repellent designed for the protection of exterior above-grade concrete, brick masonry. It penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. SW-244-40 VOC is not a coating and as a result will not discolor or change the surface appearance in any way.

TAZ-B300™ is a highly concentrated mixture of anionic and nonionic surfactants that will remove heavy oil, grease and residue from any washable surface. It is inherently biodegradable, non-hazardous and VOC compliant. TAZ B300 is formulated for quick, thorough lifting and suspension of contaminants for easy rinsing. TAZ-B300 has undergone years of product development, field trials and testing to meet the stringent demands of both the oil & gas and paint & coatings industries. TAZ-B300 was also formulated to meet government regulations for safe, non-toxic chemicals.

CP-200 ES CONCENTRATE is a unique, solvent free, VOC compliant formulation that provides color enhancement and stain protection for natural stone, brick and masonry applications.

STAINGUARD-50 stops food and beverages from staining surfaces and contains an advanced biocide that inhibits the growth of bacteria, fungi, mold and mildew. It is often used on natural stone like granite, marble and travertine, but it can also be used on concrete and other masonry building materials. STAINGUARD-50 is an excellent treatment for a wide variety of applications, including but not limited to building facades, floors, walls, swimming pool surrounds, patios, garages, and entertainment areas. Treated indoor and outdoor areas become easier to clean and maintain resulting in long-term protection of the surface’s original esthetic beauty. STAINGUARD-50 penetrates the surface and bonds chemically to the walls of the open pores as well as the surface of the substrate, stopping the ingress of water-borne and oil-based contaminants and resulting in long term hydro/oleophobic protection. STAINGUARD-50 also contains a multi-function biocide which inhibits the growth of common bacteria and fungi. It is designed to work without changing the natural appearance of the surface and never flakes or peals.

STAINGUARD-WB CONCENTRATE is a partially fluorinated short chain hard surface protectant concentrate designed for aftermarket, ambient cure applications. Ready-to-use formulations containing STAINGUARD-WB CONCENTRATE offer high level protection to a broad range of stone surfaces. STAINGUARD-WB CONCENTRATE is pH neutral to provide optimal water & oil repellency and stain resistance on surfaces such as marble, granite, limestone, saltillo, travertine, quartz, quartzite, concrete and masonry.

DithiaZolv™ is a concentrated mixture of proprietary and powerful surfactants specifically formulated to breakdown and dissolve dithiazine solids formed when triazine based H2S scavengers are used in oil and gas operations. Dissolving these solids into a water based slurry allows for easy final rinsing and cleaning. DithiaZolvTM helps optimize flow performance in pipelines, valves, filters, tanks and related process equipment.

MMR™ Restoration Cleaner is a safe and highly efficient alternative to aggressive and/or harsh cleaners traditionally used for cleaning masonry, tile and stone surfaces. MMR Restoration Cleaner is an alkaline, ambient temperature cleaner designed to remove mold, mildew, algae, moss, dirt, grease, black streaks, and many other biological deposits from new and existing surfaces.

SILANE WB CONCENTRATE™ is a VOC compliant modified silane water repellent concentrate designed for dilution with fresh potable water at the jobsite. When diluted, SILANE WB CONCENTRATE™ may be applied to vertical and horizontal, dense and porous masonry surfaces. SILANE WB CONCENTRATE™ is solvent free and VOC compliant. Prepared solutions react with the silica in concrete and masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process become an integral part of the substrate and provide long-term water repellent protection.

SW-244 is a clear penetrating, breathable water repellent designed for the protection of exterior above-grade concrete, brick masonry, and some natural stones from the damage caused by water intrusion. It penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. SW-244 is not a coating and as a result will not discolor or change the surface appearance in any way.

iRestore™ is a revolutionary safe acid cleaner used to remove biological stains as well as metal and mineral oxide stains from a wide variety of surfaces. iRestore™ was specifically designed for the restoration of historic buildings, but it is also a great choice for schools, colleges, stadiums, hospitals, churches, and other public facilities in urban environments where safety is of the utmost importance.

SW-244-100™ VOC is a high performance, 100% silane water repellent. This unique silane system is designed to penetrate deeply into the substrate and impart a high level of water and chloride ion screening. This provides the substrate with long lasting protection. SW-244-100 VOC is not a coating and as a result will not discolor or change surface appearance.

STAINGUARD-WB is a clear, penetrating, breathable, VOC compliant, water, oil and graffiti resistant treatment for concrete, porous tile, paving, grout, some natural stone and other building materials. STAINGUARD-WB penetrates the surface and bonds chemically to the substrate, resulting in long term protection by reducing the ingress of water-borne and oil-based contaminants into the surface. STAINGUARD-WB is an excellent treatment around areas where food products such as mustard, ketchup, grease, milk, wine, beer and soft drinks are present. It is also suitable for use as an anti-graffiti treatment. STAINGUARD-WB keeps treated indoor and outdoor surfaces clean and easier to maintain.

CP-500™ PREMIUM protects masonry and other building materials against damage due to penetration by water and waterborne chemicals. CP-500 PREMIUM is not a surface coating. It penetrates up to ¼ inch or ore into treated surfaces and bonds with the substrate to provide long lasting, protection, even at hairline cracks.

SILOXANE WB CONCENTRATE is a VOC compliant modified siloxane water repellent concentrate designed for dilution with fresh water at the jobsite. When diluted, SILOXANE WB CONCENTRATE™ may be applied to vertical and horizontal, dense and porous masonry surfaces. SILOXANE WB CONCENTRATE™ is solvent free and VOC compliant. Prepared solutions react with the silica in concrete and masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process become an integral part of the substrate and provide long-term water repellent protection