MMR™ Restoration Cleaner

Identification & Functionality

Product Type

Cleaner

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Cleaners

Commercial Cleaners

Features & Benefits

Labeling Claims

Biodegradable,

Chlorofluorocarbon (CFC)-Free,

Environmentally Friendly

Ready-to-Use Product Features

Degreasing,

Low Odor,

Water-based

Characteristics

Waterborne mixture of proprietary surfactants. Contains no CFC’s, non-acid, biodegradable and environmentally friendly.

Benefits

• No scrubbing or aggressive work necessary Simply spray on and wash off
• Eliminates mold, mildew, fungus and other biological damage
• Effective on many types of indoor and outdoor surfaces
• Water-based and environmentally compatible
• Low odor

Applications & Uses

Markets

HI&I Care

Applications

HI&I Care — Institutional & Industrial Care

Industrial Cleaning

Application Method

Spray

Compatible Substrates & Surfaces

Brick,

Concrete,

Grout,

Marble,

Stone,

Tile,

Wood

Uses

• MMR Restoration Cleaner is an alkaline, ambient temperature cleaner designed to remove mold, mildew, algae, moss, dirt, grease, black streaks, and many other biological deposits from new and existing surfaces.
• MMR can be used on most porous masonry, concrete and natural stone surfaces. Coverage rates vary from 50-300 sq. ft. per gallon, depending on surface porosity and texture.

Usage

For use on: Brick, Concrete, Tile, Grout, Marble, Granite, Travertine, Limestone, Sandstone, Slate, Stucco, and Wood surfaces.

Preparation

MMR Restoration Cleaner should be applied when surface and air temperatures are 40° F (4° C) or above. If freezing has occurred, allow the surface to thaw completely before application.

Applications

• Perform a test area on the required surface(s) to determine product effectiveness and coverage rates.
• Apply with a low pressure sprayer (50 psi maximum), hand pump sprayer, or electric applicator pump working from the bottom-up. Full saturate surface with cleaner.
• Let product work on the surface for 5-10 minutes. Keep surface wet, apply more cleaner as necessary.
• Heavy contaminants may require a second application and or agitation scrubbing with a brush.
• Flush all primary and adjacent surfaces with fresh water. For optimal results, rinsing with high pressure water (500-1000 psi, fan type tip) will make the job both easier and faster. Use appropriate consideration when cleaning historical or pressure sensitive surfaces.
• Reapply as needed following steps 1-4.

Limitations

Overspray can be harmful to metallic surfaces if in contact over a long period of time. Always rinse adjacent surfaces thoroughly with fresh water after each application.

Properties

Physical Form

Liquid

Odor

Organic Ether Odor

Soluble in

Water

Typical Properties

	Value	Units	Test Method / Conditions
pH	10-11	—	—
Density	1.01	g/cc	—
VOC	Federal EPA Compliant	—	—

Regulatory & Compliance

Chemical Inventories

DSL (Canada),

TSCA (USA)

Technical Details & Test Data

Coverage Rates

Always test. Coverage rates will vary depending on surface texture, porosity and level of contamination. Generally, one gallon of material will treat between 50 and 300 square feet.

Test

In an inconspicuous area to determine the suitability of this product for the intended use.

Long Term Protection

To protect newly restored surfaces, complete the restoration process with a Chemical Products water repellent/sealer. This will retard the growth of biological damage and protect the surface from the damages of water intrusion.

Packaging & Availability

Packaging Type

Drums,

Pails

Regional Availability

• Global

Container Info

• 5 gal. Pail(s)
• 55 gal. Drum(s)

Availability

MMR Restoration Cleaner is available in 1, 5 and 55 gallon drums throughout the United States.

Storage & Handling

Precautions

For specific information regarding safe handling of this material refer to the Material Safety Data Sheet.