Products

Clearco Products PSF-20cSt Silicone Heat Transfer Fluid is a clear, colorless and odorless low‐viscosity linear Polydimethylsiloxane (CAS No. 63148‐62‐9) with a viscosity of 20cSt @ 25°C. It is formulated as a cold and heat transfer medium with an operating service temperature range of –50ºC to 220ºC (closed system).

Clearco Products PSF-100cSt Silicone Heat Transfer Fluid is a 100% PDMS Silicone or linear Polydimethylsiloxane with a viscosity of 100cSt @ 25°C. It is formulated for use as a cold and heat transfer medium in a wide range of applications. PSF‐100cSt Silicone Heat Transfer Fluid has an operating service temperature range of 40ºC to 230ºC (closed system).

Clearco Products Silicone Grease NLGI#1 O‐Ring & Valve Lubricant is an NLGI #1(lowest stiffness) Silicone Grease, formulated with Polydimethylsiloxane and inert silica filler. It is used in a variety of applications that require: wide range of thermal stability, high dielectric strength, electrical insulation, inertness to rubber and plastic surfaces, and insulation against corrosion and moisture.

Clearco Products Silicone Grease NLGI#3 O‐Ring and Valve Lubricant is an NLGI #3 (stiffest consistency) Silicone Grease, formulated with polydimethylsiloxane and inert silica filler.

Clearco Products PSF-1.5cSt Silicone Heat Transfer Fluid is a clear, colorless and odorless low‐ viscosity linear Polydimethylsiloxane that is formulated as a cold and heat transfer medium in a wide range of applications. PSF‐1.5cSt Silicone Heat Transfer Fluid has an operating service temperature range of –70ºC to 120ºC (closed system only).

Clearco Products PM-125 High Temperature Silicone Heat Transfer Fluid is a clear, colorless, and odorless silicone fluid that is classified as a Phenylmethylsiloxane with a viscosity of 125cSt at 25C. It is formulated for use as a heat transfer medium for high temperature ranging from 25ºC to 300ºC (closed system).

Clearco Products HT-110 High Temperature Silicone Heat Transfer Fluid is a Polydimethylsiloxane with a viscosity of 100cSt at 25°C. It is heat‐stabilized with an iron‐siloxane additive to enhance thermal stability and resistance to oxidation. HT‐110 High Temp Silicone Bath Fluid can be used as a bath fluid/heat transfer in baths exceeding 200°C (open system) for extended periods. It can withstand high temperatures and remain stable with little viscosity change and exhibits a high resistance to oxidation and gumming.

Clearco Products PSF-5cSt Silicone Heat Transfer Fluid is a 100% linear PDMS Silicone or Polydimethylsiloxane with a viscosity of 5cSt @ 25°C. It is formulated for use as a cold and heat transfer medium in a wide range of applications. PSF‐5cSt Silicone Heat Transfer Fluid has an operating service temperature range of 70ºC to 150ºC (closed system).

Clearco Products PSF-10cSt Silicone Heat Transfer Fluid is a clear, colorless and odorless low‐viscosity linear Polydimethylsiloxane that is formulated as a cold and heat transfer medium in a wide range of applications. PSF‐10cSt Low Temperature Silicone Bath Fluid has an operating service temperature range of –60ºC to 150ºC (closed system).

Clearco Products DPDM-400 High Temperature Silicone Heat Transfer Fluid is a clear, colorless silicone fluid that is classified as a Dimethyl‐Diphenylsiloxane with a viscosity of 400cSt at 25°C. It is formulated for use as a heat transfer medium for high temperature ranging from 25ºC to 300ºC (closed system).

Clearco Products Silicone Grease 3005 NSF H1Food Grade is a 100% Silicone Grease Compound with an NLGI #2 (medium stiffness). It is formulated with PDMS Silicone or Polydimethylsiloxane and inert silica filler. Silicone Grease 3005 is characterized by its wide service temperature range, high temperature, stability, low temperature stability, high dielectric strength, excellent lubricity, inertness to virtually all rubber and plastic surfaces, and effectivenessin insulating against corrosion and moisture.

Clearco Products Silicone Grease NLGI#2 O‐Ring and Valve Lubricant is an NLGI #2 (medium stiffness) Silicone Grease, formulated with polydimethylsiloxane and inert silica filler. It is used in a variety of applications that require: wide range of thermal stability, high dielectric strength, electrical insulation, inertness to rubber and plastic surfaces, and insulation against corrosion and moisture.

Clearco Products PSF-50cSt Silicone Heat Transfer Fluid is a 100% linear Polydimethylsiloxane or PDMS Silicone with a viscosity of 100cSt @ 25°C. It is formulated fur use as a cold and heat transfer medium in a wide range of applications. PSF‐50cSt Silicone Heat Transfer Fluid has an operating service temperature range of –40ºC to 230ºC (closed system).

Clearco Products PSF-2cSt Silicone Heat Transfer Fluid is a clear, colorless and odorless low‐viscosity linear Polydimethylsiloxane that is formulated as a cold and heat transfer medium in a wide range of applications. PSF‐2cSt Silicone Heat Transfer Fluid has an operating service temperature range of –80ºC to 150ºC (closed system).