Products

Cutrite 2100 is a semi-synthetic fluid for light to moderate duty machining and grinding of ferrous and non-ferrous alloys. Cutrite 2100’s emulsifier system is designed to remain stable even in very hard water and yet properly balanced to minimize foam in softer water. Cutrite 2100 is a clean product that provides dependable rancidity control when used in machining centers with individual sumps.

Hercules EP 2 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 2 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Pandora 22, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.

Synthetic EP 460 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 460 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Olympus 100 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Vulgrind 7410 is a chlorine-free high performance grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7410 to provide a consistent level of grinding performance as well as ensuring excellent wetting, lubrication and cooling.

Hercules EP 1 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 1 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Athena 220 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Orion 1025 is a high performance cutting and grinding fluid for ferrous alloys. This oil-rejecting fluid outperforms conventional coolants in difficult operations. Orion 1025 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 1025 forms a stable solution that will not foam. Orion 1025 is a clean fluid that runs with trouble-free dependability.

Honing Oil 8579 is a low viscosity neat cutting oil designed for honing and superfinishing of ferrous metals.

Vuldra 5580 is a water soluble drawing and stamping fluid based on natural and synthetic ester technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 5580 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

Vulcut 2000LC is a moderate to heavy duty lubricant formulated for the general machining and sawing of ferrous and non-ferrous metals. The high film strength of Vulcut 2000LC provides excellent lubrication characteristics without the need of chlorine, sulfur or phosphorous based additives. Based on renewable resources, Vulcut 2000LC is biodegradable and essentially non-toxic.

Athena 10 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provide excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Athena 15 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Athena 68 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Synthetic EP 220 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 220 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Pandora 15, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.

Poseidon 320 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Hercules EP 8 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 8 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Vuldra 8525 is a water soluble drawing and stamping fluid based on vegetable oil technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 8525 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

J-Cut 4560 is a high performance cutting oil designed for mist and spray lubricators. The non-chlorinated lubricants provide excellent surface finishes on even the most difficult metals without staining.

GHO-5555 is medium viscosity high performance shaving and hobbing oil. GHO-5555 contains an oiliness additive for additional performance, especially on draggy, soft metals. It is designed primarily for gear hobbing, form grinding, and gear cutting where pressurized coolant systems are used.

Vanishing Oil 6370 is designed for light and medium duty blanking, stamping, very shallow draws and fin forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface. Vanishing Oil 6370 is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

Athena 46 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Hercules EP 4 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 4 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Synthetic EP 150 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 150 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Stearocling 600S Oils is formulated for the sliding ways of machine tools. It is formulated with high viscosity index base stocks combined with special extreme pressure friction modifiers that yield extremely low values in Cincinnati Milacron’s stick-slip test. As a result these oils are more stable to viscosity fluctuations and are able to overcome the slip-stick commonly associated with slow moving parts. Stearocling Way Oils also contain a package that eliminates the possibility of contamination through emulsification between the coolant and the way lube.

Cutrite 3398 is a high performance micro emulsion metalworking fluid for machining and grinding of ferrous and non-ferrous alloys including cast aluminum, titanium and nickel-chromium alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3398 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.

Cutrite 3399 is a high performance micro-emulsion metalworking fluid for machining and grinding of ferrous and non-ferrous alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3399 to provide excellent sump life while the reliable, low maintenance make it an ideal choice for individual sumps and central systems applications.

Vuldra 516 is a heavy duty drawing and stamping fluid for ferrous and non-ferrous alloys. Vuldra 516 is also very effective in light to medium gage tube bending operations. The high viscosity base oils, in conjunction with non-chlorinated ep additives provide excellent surface finishes even in the most demanding operations. Vuldra 516 can be used neat or diluted with water.

Hercules EP 7 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 7 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Athena 150 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Vanishing Oil is designed for light duty blanking, stamping, very shallow draws and fine forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface with virtually no residue. Vanishing oil is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

Athena 100 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Stearocling 150S Oils is formulated for the sliding ways of machine tools. It is formulated with high viscosity index base stocks combined with special extreme pressure friction modifiers that yield extremely low values in Cincinnati Milacron’s stick-slip test. As a result these oils are more stable to viscosity fluctuations and are able to overcome the slip-stick commonly associated with slow moving parts. Stearocling Way Oils also contain a package that eliminates the possibility of contamination through emulsification between the coolant and the way lube.

DuraSyn Grind is a chlorine-free, high performance grinding oil based on synthetic base oil. It provides a consistent level of grinding performance as well as ensuring excellent wetting, lubrication and cooling. DuraSyn Grind is highly effective for grinding tooling made from tungsten carbide, high speed steel, ceramics, CBN and other materials as wells as parts made from hardened steels, stainless steel and exotic metals with no surface cracking.