Products

Athena 220 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Vulcut 2000LC is a moderate to heavy duty lubricant formulated for the general machining and sawing of ferrous and non-ferrous metals. The high film strength of Vulcut 2000LC provides excellent lubrication characteristics without the need of chlorine, sulfur or phosphorous based additives. Based on renewable resources, Vulcut 2000LC is biodegradable and essentially non-toxic.

Honing Oil 8579 is a low viscosity neat cutting oil designed for honing and superfinishing of ferrous metals.

Vuldra 5580 is a water soluble drawing and stamping fluid based on natural and synthetic ester technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 5580 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

Orion 1025 is a high performance cutting and grinding fluid for ferrous alloys. This oil-rejecting fluid outperforms conventional coolants in difficult operations. Orion 1025 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 1025 forms a stable solution that will not foam. Orion 1025 is a clean fluid that runs with trouble-free dependability.

Cutrite 2100 is a semi-synthetic fluid for light to moderate duty machining and grinding of ferrous and non-ferrous alloys. Cutrite 2100’s emulsifier system is designed to remain stable even in very hard water and yet properly balanced to minimize foam in softer water. Cutrite 2100 is a clean product that provides dependable rancidity control when used in machining centers with individual sumps.

Athena 10 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provide excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Athena 15 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Olympus 100 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Synthetic EP 460 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 460 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Vulgrind 7410 is a chlorine-free high performance grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7410 to provide a consistent level of grinding performance as well as ensuring excellent wetting, lubrication and cooling.

Vanishing Oil 6370 is designed for light and medium duty blanking, stamping, very shallow draws and fin forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface. Vanishing Oil 6370 is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

Synthetic EP 150 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 150 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Athena 46 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

J-Cut 4560 is a high performance cutting oil designed for mist and spray lubricators. The non-chlorinated lubricants provide excellent surface finishes on even the most difficult metals without staining.

GHO-5555 is medium viscosity high performance shaving and hobbing oil. GHO-5555 contains an oiliness additive for additional performance, especially on draggy, soft metals. It is designed primarily for gear hobbing, form grinding, and gear cutting where pressurized coolant systems are used.

Vulclean FC-5551 is a non-flammable heavy-duty liquid detergent concentrate designed to be diluted with water for general maintenance cleaning. Vulclean FC-5551 is highly recommended for use in the hand cleaning of soiled shop machinery and, because of its fast drying and low foaming characteristics, it is also recommended for use in mechanical floor scrubbing equipment.

Organomet Powder is designed to be used in small sumps, usually of 200 gallons or less to eliminate and prevent sulfide odors and to stabilize the pH of the in-use fluid. Organomet Powder also reduces the biofilm, a breeding ground for bacteria and fungi as well as neutralizes endotoxins released from the micro-organisms found in metalworking fluids. Safe and easy to use, Organomet Powder is the most effective way to control odors in any water-based system.

Athena 68 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Oxynul RP-4820 is an oil dispersed rust preventive developed to provide long term protection in corrosive and high humidity environments. Oxynul RP-4820 also provides fingerprint suppression with a self-healing film. The thin oily residual film is easily cleaned using an alkaline cleaner.

Synthetic EP 220 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 220 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Poseidon 320 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Cutrite 2650 is a semi-synthetic fluid for light to moderate duty machining and grinding of ferrous and non-ferrous alloys. Cutrite 2650’s emulsifier system is designed to remain stable even in very hard water and yet properly balanced to minimize foam in softer water. Cutrite 2650 is a clean product that provides dependable rancidity control when used in machining centers with individual sumps.

Vuldra 8525 is a water soluble drawing and stamping fluid based on vegetable oil technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 8525 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

Vulclean SK-2288 is a heavy duty surface cleaner for steel, plastic, brass, copper and aluminum alloys in vibratory and tumbling finishing operations. Vulclean SK-2288 is formulated to quickly penetrate soils and remove them while providing excellent rust protection for up to 90 days storage indoors.

Oxynul RP-1950 is a highly effective all-purpose, water-soluble emulsion cleaner, designed to produce a soil-free surface and excellent medium term rust prevention. Oxynul RP-1950 is especially effective on freshly ground/machined surfaces, zinc phosphate and black oxide coatings.

Vuldra 4915 is a heavy duty oil formulated for extrusion, deep drawing, fine blanking and difficult stamping operations on stainless steel, low carbon steel and exotic alloys. Parts are left clean with no varnishing even under high heat operations.

Olympus 46 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Poseidon 220 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Synthetic EP 100 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 100 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Poseidon 46 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Vulclean RP-13632 is a moderately alkaline cleaner and corrosion inhibitor engineered to remove shop soils, oils, and coolants from ferrous alloys. Parts cleaned with Vulclean RP-13632 exhibit excellent corrosion protection for indoor storage and covered transport.

Poseidon 150 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Cutrite 1113B is a semi-synthetic machining fluid used primarily for cutting and grinding of cast iron and low alloy steels. The versatility of the Cutrite 1113B allows it to be used for light to moderate duty applications by varying concentration. It machines clean and is suitable for both hard and soft waters. Its biogenic formulation provides outstanding sump life and remains mild to the skin.

Vuldra 6412 is a water soluble drawing and stamping fluid designed for use in a wide range of stamping and drawing applications including deep draws and light to heavy duty stamping and drawing operations. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 6412 is a clean running product that is easily removed by both mildly alkaline and alkaline cleaners.

Vulclean FC-5111 is an economical, low alkalinity, general maintenance cleaner specially designed without using strong alkalies, phosphates or objectionable solvents. Vulclean FC-5111 is recommended for use in mechanical floor scrubbing, hand wipe, steam gun, and pressure washer applications.