Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Product Applications
It is designed for the encapsulation of coils, transformers, capacitors, diodes, relays, and other electrical and electronic components requiring good hot rigidity in molding.
Properties
- Color
- Flame Rating
- Flame Rating
- UL 94 HB
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Moisture Properties
- Processing Information (Molding)
Value | Units | Test Method / Conditions | |
Tensile Strength | 11000 | psi | — |
Tensile Strength | 770 | kg/cm² | — |
Flexural Strength | 17000 | psi | — |
Flexural Strength | 1210 | kg/cm² | — |
Compressive Strength | 33000 | psi | — |
Compressive Strength | 2320 | kg/cm² | — |
Hardness (Shore D) | 80 | — | — |
Impact Strength (Izod Notched) | 0.022 | kg-m/cm | — |
Impact Strength (Izod Notched) | 0.35 | ft-Ib/inch | — |
Value | Units | Test Method / Conditions | |
Glass Transition Temperature (Tg) | 130 | °C | — |
Thermal Conductivity | 24x10⁻⁴ | cal/cm-sec-°C | — |
Heat Distortion Temperature (at 18.6 kg/cm²) | 100 | °C | — |
Heat Distortion Temperature (at 264 psi) | 212 | °F | — |
Maximum Intermittent Operating Temperature | 190 | °C | — |
Hot Plate Cure Time (at 150 °C) | 40 | seconds | — |
Value | Units | Test Method / Conditions | |
Surface Resistivity | min. 1.0x 10¹⁶ | ohm-cm | — |
Arc Resistance | 180 | seconds | — |
Dissipation Factor (1 KHz) | 0.004 | — | ASTM 150 |
Dielectric Constant (1 KHz) | 3.5 | — | — |
Dielectric Strength (Short Time, 125 mils) | 380 | volts/mil | — |
Loss Factor (1 KHz) | 0.014 | — | ASTM 150 |
Volume Resistivity | 9.5x 10¹⁵ | Ohm - cm | — |
Value | Units | Test Method / Conditions | |
Water Absorption (at 23 °C, 24 hours) | 0.026 | % | — |
Value | Units | Test Method / Conditions | |
Bulk Density | 0.95 | gm/cc | — |
Molding Pressure | 3.5 - 70 | kg/cm² | — |
Molding Pressure | 50 - 1,000 | psi | — |
Molding Temperature | 150 - 180 | °C | — |
Molding Temperature | 302 - 356 | °F | — |
Mold Shrinkage | 0.006 | cm/cm | — |
Cure Time (at 150°C) | 1 - 3 | minutes | — |
Molded Density | 1.97 | gm/cc | — |
Spiral Flow | 89 | cm | EMMI 1-66A |
Regulatory & Compliance
Storage & Handling
- Shelf Life
- 2 days - 6 months
- Storage and Shelf life Conditions
Storage Specification Data Recommended Storage Temperature °C 4 Storage Life (Not more than 40% loss of spiral flow based on original values.) 5 °C , months 6 Storage Life (Not more than 40% loss of spiral flow based on original values.) 25 °C , weeks 1 Storage Life (Not more than 40% loss of spiral flow based on original values.) 35 °C, days 2