Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Product Applications
It is designed to encapsulate a wide range of devices including capacitors, resistors, resistor networks, relays, and high performance coils. Its low viscosity (long spiral flow) allows the molding of delicate components in large, multi-cavity molds.
Properties
- Color
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Processing Information (Molding)
Value | Units | Test Method / Conditions | |
Flexural Strength | 16000.0 | psi | — |
Flexural Strength | 1125.0 | kg/cm² | — |
Flexural Modulus | 2.25x 10⁶ | psi | — |
Flexural Modulus | 1.58 | kg/cm² | — |
Compressive Strength | 30000.0 | psi | — |
Compressive Strength | 2109.0 | kg/cm² | — |
Tensile Strength | 14000.0 | psi | — |
Tensile Strength | 984.0 | kg/cm² | — |
Value | Units | Test Method / Conditions | |
Glass Transition Temperature (Tg) | 165.0 | °C | — |
Linear Thermal Expansion (Alpha 1) | 23x 10⁻⁶ | cm/cm/°C | — |
Linear Thermal Expansion (Alpha 2) | 77x 10⁻⁶ | cm/cm/°C | — |
Hot Plate Cure Time (at 150 °C) | 35.0 | seconds | — |
Value | Units | Test Method / Conditions | |
Arc Resistance | 183.0 | seconds | — |
Dissipation Factor (1 KHz) | 0.003 | — | ASTM 150 |
Dielectric Constant (1 KHz) | 3.5 | — | — |
Dielectric Strength (1/8 Inch Section) | 350.0 | volts/mil | — |
Volume Resistivity | 8.4x 10¹⁵ | Ohm - cm | — |
Surface Resistivity | min. 1.0x 10¹⁶ | ohm-cm | — |
Value | Units | Test Method / Conditions | |
Bulk Density | 1.0 | gm/cc | — |
Molding Pressure | 14 - 70 | kg/cm² | — |
Molding Pressure | 200 - 1,000 | psi | — |
Molding Temperature | 145 - 180 | °C | — |
Molding Temperature | 293 - 356 | °F | — |
Mold Shrinkage | 0.005 | gm/cc | — |
Cure Time (at 150°C) | 1 - 2 | minutes | — |
Molded Density | 1.89 | gm/cc | — |
Spiral Flow | 114.0 | cm | EMMI 1-66A |
Regulatory & Compliance
Storage & Handling
- Shelf Life
- 6 months
- Storage and Shelf life Conditions
Storage Specification Data Recommended Storage Temperature °C 4 Storage Life (Not more than 40% loss of spiral flow based on original values.) 5 °C , months 6