Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Application Area
- Application Method
- Cure Method
- Application Method
- Screen-print
Properties
- Physical Form
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Minimum Cure Temperature | 80 | °C | — |
Value | Units | Test Method / Conditions | |
Volume Resistivity (X and Y Axis) | 1x 10^12 | Ω - cm | — |
Volume Resistivity (Z Axis) | 0.0001 | Ω - cm | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -55 to 140 | ºC | — |
Peel Strength | 9 - 11 | lbs./inch | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 2 months at 25°C, 6 months at 5°C, 9 months at -10°C
- Handling & Curing
112-05 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner # 113-12. Apply thin film of adhesive to one or both surfaces to be bonded. Apply adhesive to a total dry thickness of 0.6 - 1.3 mils. Dry at room temperature for approximately 30 to 40 minutes, or 1-3 minutes at 120°C. Place the two surfaces together and cure in a heat-sealing press for 5-7 seconds @ 175°C using 100 - 150 psi to hold the surfaces tightly together. End user is advised to experimentally determine pressure, temperature and time best suited for individual applications. (See back of sheet for step-by-step directions.)