Products

128-32-25 is a screen-printable, B-stageable, anisotropically conductive, epoxy adhesive suitable for application by screen-printing, dipping and syringe dispensing. This product features excellent adhesion to a variety of metallic contact pad compositions as well as other substrates. Unlike conventional conductive materials, this product is very resistant to solvents, heat, and thermocycling. Applications for 128-32-25 include, but are not limited to, conductive splicing of ribbon cables, electrical attachment of surface mounted devices and bonding of flex circuits to PC boards and electroluminescent panels. This product offers a faster cure at lower temperatures and will snap cure at higher temperatures. This system features excellent thermal stability. 128-32-25 is optimized for a 0.001” bond line.Features Minimal flow during cure Low Cure Temperature B-Stageable Long Screen Life Excellent Chemical Resistance Excellent Room Temperature Stability

124-22C is a pre catalyzed, solvent-resistant, anisotropic conductive ink, coating and adhesive. This product features excellent adhesion to Kapton, Mylar, glass, polycarbonate and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone. It is also very resistant to scratching and creasing. Applications for 124-22C include, but are not limited to, conductive splicing of ribbon cables, PTF circuits, and electrical attachment of surface mounted devices. This product is useful in application where shorts between closely spaced contacts is a concern.Features Solvent resistant, low temperature curing epoxy adhesive

124-19 is a two part, room temperature curing, anisotropic conductive epoxy adhesive. The system is designed for making electrical and mechanical attachments on electrical components and devices. Unlike typical room temperature curing systems, this product always results in excellent anisotropic conductivity and is less sensitive to handling and ambient conditions. Complimentary B components allow for customization of end properties. Use B2713 for more flexibility and lower stress; use the standard B component for high strength requirements.Features Room temperature curing High bond strength Increased flexibility

125-31FPC is a syringe dispensable, 100 % solids, thermally conductive, electrically insulating, pre-catalyzed epoxy adhesive. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Unlike conventional thermally conductive epoxy adhesives, 125-31FPC is flexible and is able to absorb stress when bonding mismatched CTE substrates. Applications include die attachment, printed circuit board fabrication, advanced material composites, LED attachment and heat sink bonding. 125-31FPC is a finer particle version of 125-31C.Features Highly thermally conductive epoxy adhesive B-Stageable Low temperature curing

124-19 is a two part, room temperature curing, anisotropic conductive epoxy adhesive. The system is designed for making electrical and mechanical attachments on electrical components and devices. Unlike typical room temperature curing systems, this product always results in excellent anisotropic conductivity and is less sensitive to handling and ambient conditions. Complimentary B components allow for customization of end properties. Use B2713 for more flexibility and lower stress; use the standard B component for high strength requirements.Features Room temperature curing High bond strength

109-12 is a one component, highly thermally conductive, low stress, low shrink potting compound and adhesive. 109-12 features exceptional resistance to thermal cycling. Recommended applications include potting of dissimilar materials requiring class "F+" service temperature rating. 109-12 is a more thermally conductive version of 108-50.Features Low stress High thermally conductive adhesive/potting compound

122-39(SD) is a syringe dispensable, thermally conductive, electrically insulating, one component, 100% solids epoxy adhesive. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Applications include adhesion to gold plated substrates and tin/lead solder terminated components, die attach and thermal management operations, printed circuit board fabrication, advanced material composites, sealing and high performance coatings. 122-39(SD) is a thermally conductive version of 122- 38(SD).Features Ionically clean die attach adhesive

126-37 is a screen-printable, B-Stageable, anisotropic conductive, one part epoxy adhesive, suitable for application by screen-printing and syringe dispensing. 126-37 is designed to exhibit minimal flow during bonding. This product provides superior electrical conductivity when bonding circuit materials to metal back planes and heat sinks. This product has excellent adhesion to aluminum, ceramic, and a variety of other substrates. Additional applications include, but are not limited to, assembling electrical and electronic components. This system features excellent thermal stability and flexibility in the B-Staged form. 126-37 is an anisotropic conductive version of 125-22.Features Minimal flow during cure Low CTE B-Stageable Long Screen Life Excellent Chemical Resistance Excellent High Temperature Performance

108-50 is a one component, thermally conductive, low stress, low shrink potting compound and adhesive. 108-50 features exceptional resistance to thermal cycling. Recommended applications include potting of dissimilar materials requiring Class "F" service temperature rating. 108-50 can also be used as an adhesive for bonding stress sensitive substrates.Features Low stress, moderate thermally conductive adhesive/potting compound

127-03 is a screen-printable, B-Stageable, thermally conductive, one part epoxy adhesive, suitable for application by screen-printing and syringe dispensing. 127-03 is designed to exhibit minimal flow during bonding. This product has excellent adhesion to copper, aluminum and ceramic and a variety of other substrates. Additional applications include, but are not limited to, die attachment, printed circuit board fabrication, advanced material composites, LED attachment, and heat sink bonding. The chemistry in 127-03 features excellent thermal stability and flexibility in the B-Staged form and is optimal for absorbing stress when bonding mismatched CTE substrates. 127-03 is a thermally conductive, electrically insulating version of 125-22.Features Minimal flow during cure Low CTE B-Stageable Long Screen Life Excellent Chemical Resistance Excellent High Temperature Performance Highly thermally conductive epoxy adhesive B-Stageable

126-08 is a screen-printable, B-Stageable, highly thermally conductive, one part epoxy coating and adhesive. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Applications include adhesives, printed circuit board fabrication, advanced material composites, sealing and high performance coatings.Features Extremely high thermally conductive epoxy adhesive

127-45 is a die attach adhesive engineered for high reliability performance and high efficiency production. This product is a syringe dispensable, anisotropic conductive, one component, 100% solids epoxy adhesive and features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Applications include adhesion to gold plated substrates and tin/lead solder terminated components, die attach operations, printed circuit board fabrication, advanced material composites, sealing and high performance coatings. 127-45 is an anisotropic conductive version of Electraset™ 620.Features Die attach adhesive

122-44(SP)C is a flexible anisotropic conductive silicone adhesive. features the highest degree of thermal and mechanical reliability over any other conductive adhesive technology and provides no failures during thermal cycling, heat aging, shocking or vibration due to the reliability from the elasticity of the product. This product is very resistant to flexing and creasing. 122-44(SP)C is designed for bonding rubber to a variety of substrates such as aluminum, stainless steel, and steel. Additionally, 122-44(SP)C is one of the few conductive adhesives that can bond to silicone substrates and surfaces.122-44(SP)C is a non-flammable version of 122-44.Features Non-flammable silicone, pressure sensitive adhesive

128-32FP is a screen-printable, B-stageable, anisotropically conductive, epoxy adhesive suitable for application by screen-printing, dipping and syringe dispensing. This product features excellent adhesion to a variety of metallic contact pad compositions as well as other substrates. Unlike conventional conductive materials, this product is very resistant to solvents, heat, and thermocycling. Applications for 128-32FP include, but are not limited to, conductive splicing of ribbon cables, electrical attachment of surface mounted devices and bonding of flex circuits to PC boards and electroluminescent panels. 128-32FP is especially useful in applications where shorts between closely spaced contacts is a concern and it features a finer pitch than traditional anisotropic conductive materials. This product offers a faster cure at lower temperatures and will snap cure at higher temperatures. This system features excellent thermal stability. 128-32FP is able to be used with pad sizes as small as 70 μm and spaces as fine as 30 μm.Features Minimal flow during cure Low Cure Temperature B-Stageable Long Screen Life Excellent Chemical Resistance Excellent Room Temperature Stability

126-22 is a pre-catalyzed, solvent-resistant, anisotropic conductive adhesive. This product features excellent adhesion to Kapton, Mylar, glass, and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone. This product features a hydrophobic resin that has proven well in humid aging studies and is also very resistant to scratching and creasing. Applications for 126-22 include, but are not limited to, conductive splicing of ribbon cables, PTF circuits attachments, and LED surface bonding demands. This product is useful in application where ensuring good electrical contact for all connections is a concern.Features Solvent resistant epoxy adhesive Ideal for LED bonding

128-32-50 is a screen-printable, B-stageable, anisotropically conductive, epoxy adhesive suitable for application by screen-printing, dipping and syringe dispensing. This product features excellent adhesion to a variety of metallic contact pad compositions as well as other substrates. Unlike conventional conductive materials, this product is very resistant to solvents, heat, and thermocycling. Applications for 128-32-50 include, but are not limited to, conductive splicing of ribbon cables, electrical attachment of surface mounted devices and bonding of flex circuits to PC boards and electroluminescent panels. This product offers a faster cure at lower temperatures and will snap cure at higher temperatures. This system features excellent thermal stability. 128-32-50 is optimized for a 0.002” bond line.Features Minimal flow during cure Low Cure Temperature B-Stageable Long Screen Life Excellent Chemical Resistance B-stageable epoxy adhesive, ideal for 50µm bond line

102-32NFC is a flexible electrically conductive silicone adhesive. 102-32NFC features the highest degree of thermal and mechanical reliability over any other conductive adhesive technology and provides no failures during thermal cycling, heat aging, shocking or vibration due to the reliability from the elasticity of the product. Some applications for 102-32NFC include, but are not limited to, elastomeric conductive bridging and bonding, conductive bonding of low surface energy materials, conductive via filling and electrical attachments for stress sensitive devices. 102-32NFC is one of the few conductive adhesives that can bond to silicone substrates and surfaces. 102-32NFC is a non-flammable version of 102-32.Features High temperature Flexible silicone adhesive Non-flammable.

124-24 is a screen-printable, anisotropic, UV cured adhesive. This product can be used on a variety of substrates such as polycarbonate, treated and untreated polyesters, Kapton, epoxy/glass PC boards and glass.Features UV curable flexible adhesive

128-17A/B is a two-part, room temperature curing, silver-filled fast curing adhesive. This system is designed for making electrical and mechanical attachments on electrical components and devices and features a very quick setup time allowing for rapid processing and repair in a variety of applications. 128-17A/B features a volumetric 3-to-2 mix ratio, allowing it to be easily handled by most mixing equipment.Features Fast curing, room temperature curing conductive adhesive

The 805-19C is a one-component, high performance, silver filled room temperature curable epoxy adhesive.Features One component room temperature curing

121-23 is a screen-printable, B-stageable, anisotropically conductive, epoxy adhesive suitable for application by screen-printing, dipping and syringe dispensing. This product features excellent adhesion to a variety of metallic contact pad compositions as well as other substrates. Unlike conventional conductive materials, this product is very resistant to solvents, heat, and thermocycling. Applications for 121-23 include, but are not limited to, conductive splicing of ribbon cables, electrical attachment of surface mounted devices and bonding of flex circuits to PC boards and electroluminescent panels. This product is useful in application where shorts between closely spaced contacts are a concern. This system features excellent thermal stability.Features B-stageable conductive epoxy adhesive, ideal for In Mold Electronics connections with adhesion to polycarbonate

108-50MG is a one component, thermally conductive, low stress, low shrink potting compound and adhesive. 108-50MG features exceptional resistance to thermal cycling. Recommended applications include potting of dissimilar materials requiring Class "F" service temperature rating. 108-50MG can also be used as an adhesive for bonding stress sensitive substrates when low ionics or low hydrolyzable chloride is required. 108- 50MG is a microelectronics grade version of 108-50.Features Microelectronics grade Low stress Moderate thermally conductive adhesive/potting compound

125-35C is a syringe dispensable, 100 % solids, thermally conductive, electrically insulating, precatalyzed, epoxy adhesive. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Unlike conventional thermally conductive epoxy adhesives, 125-35C is flexible and is able to absorb stress when bonding mismatched CTE substrates. Applications include die attachment, printed circuit board fabrication, advanced material composites, LED attachment and heat sink bonding. This is an electrically insulating, thermally conductive version of 124-08C.Features Highly thermally conductive epoxy adhesive

127-31 is an extremely flexible one-component, syringe dispensable, 100% solids, thermally conductive, electrically insulating soft epoxy adhesive, encapsulant, and potting compound. This system features excellent thermal stability, chemical resistance and excellent high temperature properties. Unlike conventional thermally conductive epoxy adhesives, 127-31 features a low durometer and is highly flexible allowing it to absorb stress when bonding mismatched CTE substrates. 127-31 even displays some elastomeric properties. Applications include die attachment, printed circuit board fabrication, advanced material composites, LED attachment and heat sink bonding.Features Elastomeric Flexible thermally conductive adhesive/potting compound

122-38(SD) is a single component, silver filled, syringe dispensable, 100% solid, electrically conductive, epoxy adhesive. 122-38(SD) provides for fine pitch resolution, when syringe dispensed, stencil printed, or screen-printed. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Applications include adhesives, die attachment, printed circuit board fabrication, advanced material composites, sealing and high performance coatings. 122-38(SD) provides excellent adhesion to gold plated substrates, as well as tin/lead solder terminated components.Features Ionically clean die attach adhesive

128-21C is a jet or syringe dispensable, thermally conductive, electrically insulating, pre-catalyzed epoxy adhesive. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Unlike conventional thermally conductive epoxy adhesives, 128-21C is flexible and can absorb stress when bonding mismatched CTE substrates. Applications include die attachment, printed circuit board fabrication, advanced material composites, LED attachment and heat sink bonding. 128-21C is a version of 125-31C optimized for jet dispensing.Features Low stress thermally highly thermally conductive epoxy adhesive

122-44 is a silicone, pressure sensitive, screen-printable anisotropic conductive adhesive. The overall balance of peel strength, cohesion, lap shear strength, high temperature holding power, and conductivity provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. 122-44 is designed for bonding rubber to a variety of substrates such as aluminum, stainless steel, and steel. Peel strength develops rapidly and continues to increase for approximately one week.Features Silicone, pressure sensitive adhesive

124-33(S) is a solvent resistant flexible electrically conductive adhesive. This product features excellent adhesion to Kapton®, Mylar®, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 124-33(S) include, but are not limited to, electrical attachments for surface mounted devices and heat-sealing openings in emi/rfi enclosures. 124-33(S) is a thermosetting version of 124-33 that is chemical and age resistant.Features Extremely flexible conductive adhesive

102-32RT is a flexible, reworkable, electrically conductive, silicone pressure sensitive adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 102-32RT include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 102-32RT is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces. 102-32RT features better conductivity than 102-32 when cured at lower temperatures.Features High temperature Flexible silicone adhesive Low temperature curing

112-05 is screen-printable, anisotropic, conductive hot melt adhesive. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. The product can be rebonded many times by simply adding heat and slight pressure. Applications for 112-05 include, but are not limited to, conductive splicing of ribbon cables, PTF circuits, and electrical attachment of surface mounted devices. This product is useful in application where shorts between closely spaced contacts is a concern. 112-05 is a screen-printable version of 111-29.Features Thermoplastic urethane adhesive

102-32 is a flexible, reworkable, electrically conductive, silicone pressure sensitive adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 102-32 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 102-32 is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces.Features High temperature flexible silicone adhesive.

128-33 is a single component, silver filled, electrically conductive epoxy ink and adhesive suitable for application by syringe dispensing and pin transfer. This product is designed for assembling electrical components and features exceptional pot life, flexibility, and chemical resistance compared to typical conductive adhesives. With its unique balance of properties 128-33 is well-suited for bonding on a wide range of substrates including copper, silicon, glass, and gold among many others.Features High temperature single component conductive adhesive

124-08LVC is a one part, heat cured, flexible, silver–filled epoxy adhesive used for making electrical and mechanical attachments on electrical components and devices. The 124-08LVC is capable of being applied via syringe dispensing and is also capable of being dispensed via direct write and jetting systems, such as EFD's PicoDot™ jet dispenser. Unlike typical heat curing systems, this product always results in excellent conductivity and is less sensitive to handling and ambient conditions. 124-08LVC is lower viscosity version of 124- 08C.Features Single component conductive adhesive.

125-22C119-44 is a screen-printable, B-Stageable, electrically conductive, one-part epoxy adhesive, suitable for application by screen-printing and syringe dispensing. 125-22C119-44 is designed to exhibit minimal flow during bonding. This product provides superior electrical and thermal conductivity when bonding circuit materials to metal back planes and heat sinks. This product has excellent adhesion to copper, aluminum and ceramic and a variety of other substrates. Additional applications include, but are not limited to, assembling electrical and electronic components. This system features excellent thermal stability and flexibility in the B-Staged form. 125-22C119-44 is 125-22 with 2% by weight B119-44 added for reduced cure times and temperatures.Features Minimal flow during cure Low CTE B-Stageable Long Screen Life Excellent Chemical Resistance Excellent High Temperature Performance Lower temperature curing version of 125-22

114-26 B is a medical grade, electrically conductive, polymer coated polyester film composition. It is typically used as a component for fabricating electrodes in medical testing applications. This product has been formulated to have improved conductivity and high electrical dissipation properties. Some added applications for 114-26 B include, but are not limited to, emi/rfi shielding, polymer thick film circuitry, membrane switches and electrical static dissipation. 114-26 B is available in rolls ranging in widths up to 20 inches and lengths up to 2000 feet.