Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Application Method
- Pad-print
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Conductivity | 0.04 | ohms/sq/mil | — |
Viscosity | 10,000 - 12,000 | cps | — |
Filler | Silver | — | — |
Percent Silver (cured) | min. 78 | — | — |
Volume Resistance | max. 0.0001 | Ω-cm | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -55 to 250 | ºC | — |
Thermal Stability | Good to 325 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at 5°C, 12 months at -10°C., 3 months at 25°C
- Suggested Handling & Curing
117-31 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner #113-39 or for slower drying CMI Thinner# 114-20. Prior to using, be certain to resuspend silver. Best properties, for most applications, result when cured for 1 hour at 175°C with a post cure of 1 hour at 200°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications.