Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Application Method
- Cure Method
- Application Method
- Screen-print
Properties
- Physical Form
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Minimum Cure Temperature | UV | — | — |
Value | Units | Test Method / Conditions | |
Volume Resistivity (X and Y Axis) | 1x 10^12 | Ω - cm | — |
Volume Resistivity (Z Axis) | 0.0001 | Ω - cm | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -55 to 140 | ºC | — |
Thermal Stability | Good to 220 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin
Storage & Handling
- Shelf Life
- 6 months at 5°C, 3 months at 25°
- Suggested Handling & Curing
Material is ready to use as received. Cure using a 200-300 watt/inch mercury vapor lamp. Speed of cure will vary depending upon available energy. Typical cure time ranges from a few seconds to 1 minute when work is positioned 6-10 inches from lamp. Faster curing can be accomplished by moving lamp closer to work or increasing lamp intensity. When applying two layers, it is sometimes desirable to under-cure the first layer so as to improve interlayer adhesion. NOTE: Direct exposure to UV light source is required for material to cure properly.