Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
- Application Method
- Screen-print
Properties
- Physical Form
- Component A
- Component B
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.05 | — | — |
| Pot Life (once mixed at 25°C) | 4 days | — | — |
| Mix Ratio by Weight | 1 | — | — |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.05 | — | — |
| Mix Ratio by Weight | 1 | — | — |
| Pot Life (once mixed at 25°C) | 4 days | — | — |
| Value | Units | Test Method / Conditions | |
| Viscosity | 40000 | cps | — |
| Filler | Carbon | — | — |
| Specific Gravity (water = 1) | 1.05 | — | — |
| Volume Resistance | max. 0.65 | Ω-cm | — |
| Sheet Resistance | max. 250 | Ω/sq/mil | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | -60 to 180 | ºC | — |
| Thermal Stability | Good to +200 | °C | — |
Safety & Health
- Safety & Handling
- Contains flammable solvents.
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 12 months (at 25˚C)
- Suggested Handling & Curing
126-03(SP)A/B is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI 127-05 or Xylene. Prior to using, be certain to re-suspend any settled filler. Good properties are achieved when cured for 60 minutes at 150°C but end user is advised to experimentally determine temperature and time best suited for individual applications. 126-03(SP)A/B is not recommended for applications that cannot cure below 150°C.