Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Conductivity | 1 | ohms/sq/mil | — |
Viscosity | 25,000 - 35,000 | cps | — |
Volume Resistance | max. 0.0025 | Ω-cm | — |
Sheet Resistance | max. 1 | Ω/sq/mil | — |
Coverage (1 gram at 0.5 mils wet in2) | min. 80 | — | — |
Pencil Hardness | min. 2H | — | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -55 to 2000 | ºC | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at 5°C, 12 months at -10°C., 3 months at 25°C
- Suggested Handling & Curing
126-35 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 112-19 or 113-12. Prior to use, be certain to mix well to re-suspend silver. Best properties for most applications result when cured for 5 minutes at 120°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications.