Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Method
- Application Method
- Syringe dispense/Screen-print
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | approx. 40,000 | cps | — |
| Filler | Silver | — | — |
| Percent Silver (cured) | min. 80 | — | — |
| Volume Resistance | 4.0e-05 | Ω-cm | — |
| Sheet Resistance | 0.015 | Ω/sq/mil | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | -70 to 450 | ºC | — |
| Thermal Stability | Good to +550 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Contains flammable ingredients.
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
NOTE: 127-49 Part A does not cure without the addition of Part B.
Storage & Handling
- Suggested Handling & Curing
Pre-mix part A to ensure homogenous dispersion of filler. Settling of filler in part A is not uncommon. Add 2 to 5% by weight Part B to Part A and mix until homogeneous. Best properties, for most applications, result when cured for 2 hours at 70°C followed by 1 hour at 150°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 25°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications. Product develops full properties at room temperature between 2 and 7 days depending on thickness.
- Storage
Shelf life: 6 months at 25°C in unopened, unmixed containers.
NOTE: Use catalyzed product within 4 hours.