Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
810-44-2 is specifically formulated to provide a low coefficient of thermal expansion and minimal flow during cure.
Applications & Uses
- Markets
- Cure Method
Properties
- Color
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Pot Life | 4 | Hours | — |
Value | Units | Test Method / Conditions | |
Hardness (measured at 25°C) | 84 | Shore D | — |
Thermal Conductivity (at 121°C) | 1.46 | Btu ft/ft2 -hr-°F | — |
Operating Temperature Range | 20 to +125 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Instruction
Combine the Resin and the Hardener in the ratio listed above. Mix by hand or mechanical mixer until material is uniform in appearance.
- Shelf Life
One Year at 25°C (both A+B). Hand agitation of both components is recommended after long standing to insure best results.
- Storage and Handling
Normal storage and handling is at room temperature. Use standard mixing and housekeeping procedures to minimize the risk of spills and contact with the surrounding material
- Cure Schedule
16 hours @ 25°C (77°F) will yield 80% of the systems full potential. An additional 24 hours @ 25°C (77°F) will yield the systems full potential).
% Full Cured 80 100% 100% Cure Temp: 25°C 25 or 65°C Cure Time (Hours): 16 48 2 Pot Life (20 grams) @ 25°C = 4 hours