Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
The 811-64 System is a mixed system that features a low viscosity for good flow properties and moderate set up time. 811-64 is primarily used for potting or ruggedizing heat sensitive electronic parts. The low viscosity mixture exhibits exceptional wetting and void free pouring during application. 811-64 is a lower shrinkage version of the 810-70.
Applications & Uses
- Markets
- Application Area
- Cure Method
Properties
- Component A
- Component B
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.62 (Resin) | — | — |
Mix Ratio | 12 (Hardner) | — | — |
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.02 (Hardener) | — | — |
Mix Ratio | 100 (Resin) | — | — |
Value | Units | Test Method / Conditions | |
Operating Temperature Range | -20 to +100 | °C | — |
Pot Life | 45 | Minutes | — |
Value | Units | Test Method / Conditions | |
Hardness (measured at 25°C) | 85 | Shore D | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 1 Year
- Shelf Life
One Year at 25°C (both A+B). Hand agitation of the Resin component is recommended after long standing to insure best results.
- Instruction
Combine the Resin and the Hardener in the ratio listed above. Mix by hand or mechanical mixer until material is uniform in appearance.
- Cure Schedule
Overnight or 16 hours at 25°C will yield 80% of the systems full potential.
% Full Cured 80% 100% Cure Temp 25°C 25°C Cure Time (Hours) 16 96 Pot Life (100 grams) @ 25°C = 45 minutes
- Storage and Handling
Normal storage and handling is at room temperature. Use standard mixing and housekeeping procedures to minimize the risk of spills and contact with the surrounding materials.