Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Mixing Instructions
Premix Part A in original container prior to adding curing agent. Add Part B187 to Part A and mix until uniform. NOTE: It is not unusual for crystallization of the B-187 to occur. Warm to 40-45°C in a water bath to return the material to it's original viscosity. The crystallization of the catalyst does not effect the performance of the product in any way. To prevent recrystallization, store the B-187 at temperatures between 35-45°C.
Properties
- Color
- Appearance
- Amber, Black
- Component A
- Typical Properties
- Component B
- Typical Cured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 55000 | cps | - |
| Mix Ratio (by weight) | 100 | - | - |
| Value | Units | Test Method / Conditions | |
| Pot Life | 4 hours | - | - |
| Viscosity | 5000 | cps | - |
| Value | Units | Test Method / Conditions | |
| Viscosity | 300 | cps | - |
| Mix Ratio (by weight) | 12 | - | - |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.49 | - | - |
| Hardness | min. 85 | Shore D | - |
| Coefficient of Thermal Expansion | 22 | in/in °C x 10^-6 | - |
| Thermal Conduction | 1.28 | W/m-K | - |
| Cure Shrinkage | 0.189 | % | - |
| Heat Distortion Temperature (with B-187) | 148 | °C | - |
| Fungus Resistance | Non-nutrient | - | - |
| Tensile Strength | 9600 | psi | - |
| Water Absorption | max. 0.22 | % | - |
| Dielectric Strength | 475 | volts/mil | - |
| Volume Resistivity | 1x 10^15 | Ω - cm | - |
| Power Factor (60 HZ) | 0.028 | - | - |
| Dielectric Constant (at 60 Hz) | 4.3 | - | - |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Curing Instructions
Handling Properties: 30 mins@ 80°C Full Cure: 1 hr @ 80°C or 1/2 hr 100°C