Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Application Area
- Application Method
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 16000 | cps | — |
| Glass Transition Temperature | min. 300 | °C | — |
| Dielectric Strength | min. 5,000 | volts/mil | — |
| Coefficient of Thermal Expansion | 29 | ppm | — |
| Hydrolytic Stability | Excellent | — | — |
| Moisture Absorption | max. 0.9 | % | — |
| Useful Temperature Range | -55 to 350 | ºC | — |
| Thermal Stability | Good to +410 | °C | — |
| T-Shear Strength | min. 1,500 | psi | — |
| Weight Loss (1000 hours at 300°C) | max. 2 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 1 year when stored at 25°C
- Suggested Handling & Curing
122-01(P) is ready to use as supplied. Apply material to surface to be bonded by hand and/or automatic method and assemble. Apply slight pressure to assure good mating of surfaces and formation of filet. Best properties for most applications result when cured for 30 minutes at 150°C followed by 30 minutes at 250°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 80°C to 250°C. For removal our 102-03 solvent is recommended. You may also use NMP for stripping the 122-01(P). End user is advised to experimentally determine temperature and time best suited for individual applications.
- Shelf Life
- 1 year when stored at 25°C or less. Storing at higher temperatures may advance the resin.