Daikin Industries, Ltd. PPA DA-910

Identification & Functionality

Chemical Family

Fluoropolymers

Plastics & Elastomers Functions

Processing Aid

Technologies

Plastics

Product Families

Plastics — Polymer Additives

Processing Aids

Features & Benefits

Materials Features

Odorless

Product Benefits

• Developed as processing aid of polyolefin resin (LLDPE, LDPE, etc.) and especially suitable for polyethylene film.
• Coating extrusion equipment decreases the friction between the polymer melt and the die wall.
• Reducing die pressure can eliminate melt fracture and die build up.
• Lower extrusion temperature can be applied and simultaneously improve line speed.
• Compared with previous generation, only half concentration (250ppm) can eliminate melt fracture.

Applications & Uses

Markets

Electrical & Electronics

Applications

Electrical & Electronics — Wire & Cable

Jacketing & Insulation

Compatible Polymers & Resins

Linear Low Density Polyethylene (LLDPE) ,

Low-Density Polyethylene (LDPE)

Plastics & Elastomers End Uses

Cables,

Wires

Plastics & Elastomers Processing Methods

Extrusion

Properties

Physical Form

Powder,

Solid

Appearance

White powder

Physical Properties

	Value	Units	Test Method / Conditions
Active Ingredient (Fluoroelastomer)	97	%	Internal Method
Bulk Density	0.7	g/cm³	ISO 60
Particle Size	300	μm	ISO 2591-1
Partitioning Agent (inorganic)	3	%	Internal Method

Note

The above numeric values are representative and not guaranteed.

Safety & Health

Handling Method / Safety Information

• Be sure to read the notes on SDS and labels before use.
• This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
• Daikin PPA DA-910 complies with United States FDA regulation 21 CFR 177.1520 when used at levels not to exceed 0.21%. The polyolefins containing Daikin PPA DA-910 may be used only for conditions A through H, in table 2, 21 CFR 176.170. Daikin PPA DA-910 complies with Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food and with Commission Regulation (EU) No 10/2011 of 14 January, 2011 on plastic materials and articles intended to come into contact with food. It is the sole responsibility of the user to determine whether the use of Daikin PPA DA-910 in a particular application is suitable and complies with applicable laws and regulations

Packaging & Availability

Packing Specification

20kg