Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Characteristics
- Excellent water and oil repellency
- Good anti finger print property
- Maintain excellent water and oil repellency with superb UV resistant
- Supper thin film coating and no impact for optical properties
- Reduce sliding contact angle
- Non-stick and low surface energy
- Cures with Glass, SiO2 and AR surface in the room temperature
- Excellent acid / base resistant
Properties
- Physical Form
- Typical Properties
- Note
- The following Typical Properties was measured on UD120 coated Gorilla Glass surface and are not suitable for specification purposes.
- (*2) Irradiation time to keep water contact angle above 100 degrees. UV source: UV-B313, Irradiance ( at 313nm):0.63W/m2
- (*3) Irradiation time to keep water contact angle above 100 degrees (SAE J2527).
- (*4 Maximum rubbing cycles to keep water contact angle above 100 degrees. Conditions: Steel wool #0000, Load: 1 Kgf/cm2, Stroke: 6cm, Speed: 60rpm
- (*5) Equipment: LabthinkFPT-1, Load: 200g, Speed: 200mm/min, friction material: paper
- (*6) Water contact angle in Air 130 after 6days passage.
- (*7) Water contact angle in Air 85°C°C/85%RH after 6days passage.
- (*8) Water contact angle in 1.0mass% HClaq. 25 after 4days passage.
- (*9) Water contact angle in 4.0mass% NaOHaq. 25 after 4hours passage.
Value | Units | Test Method / Conditions | |
Acid Resistant (*8) | 115 | Degree | — |
Base Resistant (*9) | 114 | Degree | — |
Cleanability | Excellent | — | — |
COF (*5) | 0.07 | — | — |
Critical Surface Tension | 13 | mN/m | — |
Haze | 0.24 | % | — |
QUV Durability (*2) | 600 | h | — |
Sliding Angle (n-hexadecane) | 6 | Degree | — |
Sliding Angle (Water) | 8 | Degree | — |
Steel Wool Abrasion Durability (*4) | 12000 | cycle | — |
Tendency for Fingerprint Transfer | Better | — | — |
Water Contact Angle | 115 | Degree | — |
Water Contact Angle | 115 | Degree | High Temperature and High Humidity Test (*7) |
Water Contact Angle | 115 | Degree | High Temperature Test (*6) |
Xenon Arc Lamp Durability (*3) | 990 | h | — |
Technical Details & Test Data
- Accelerated Weathering Test
Accelerated Weathering Test (QUV)
Accelerated Weathering Test (SAE J2527)
Safety & Health
- Handling / Safety Information
- Please refer to Safety Data Sheet
- The product is designed for industrial use only. The compliance to the relevant regulations and technical standards for intended use is obligation of the manufacturers of final article.
Packaging & Availability
- Package
100g