Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Agrochemical Functions
- CASE Ingredients Functions
- Industrial Additives Functions
- Product Families
Features & Benefits
- Agrochemicals Features
- CASE Ingredients Features
- Industrial Additives Features
Applications & Uses
- Markets
- Applicable Processes
- Coating Type
- Industrial Additives End Use
- Use Level
- 0.05 - 0.5 % (in construction)
- Applications
- DeCAL 2075 is an ideal dispersing agent for a wide range of water-borne systems in the coatings, agrochemical, textile and construction industries.
Construction:
- As a superplasticizer/cement saver in mortars and concretes
- Prevents bleeding/segregation
- High early and final strength
- Good compatibility
- High water reduction
- Used for self leveling and self-compacting concretes
- Pre-cast concretes/blocks with low water/cement ratios
Textiles :
As a polymeric dispersant and protective colloid. Used to aid wash off of reactive dyeings and prints on cellulosic substrate.Mining and mineral processing:
As an antiscalent in aqueous based mineral processing and the sugar industry, preventing the onset of inorganic precipitation and preventing the fouling of heat exchangers.
Oilfield uses:
As a mineral dispersant for drilling fluids and an anti-scalent for aqueous fluids. Devine Chemicals also offer polyacrylates in the ammonium salt or free acid forms and also a range of differing copolymers and molecular weights
Agrochemicals:
DeCAL 2075 is highly suited to the preparation of suspension and emulsion concentrates.- DeCAL 2075 can be used as supplied without pre-dilution.
- DeCAL 2075 is supplied as an easily pumpable low viscosity solution, even at lower temperatures.
- DeCAL 2075 can be used to increase the solids loading of the required inorganic dispersion or reduce the working viscosity at a given solids content. As a result, process efficiency is increased and economics improved.
- Compared with inorganic dispersing agents, e.g., polyphosphate products, the organic polymer based DeCAL 2075 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes.
- Incorporation in Formulations
- It is recommended to add the pigment to water containing the dispersing agent with stirring as opposed to addition of the dispersing agent to a pigment slurry. In general, the pH of the final preparation should be in the region of 8.5 to obtain optimum dispersing efficiency. The optimum amount of dispersing agent required to form a stable dispersion strongly depends on a pigment’s chemical nature, the particle surface and shape.
- The polymer base of the latex also plays a very important part in the stability equation. In general, significant overdosing may deteriorate the coatings properties (e.g., water resistance) and also generates an economic disadvantage.
- Likewise insufficient dispersing agent will lead to instability on storage. In common with other dispersing agents, because of the batch-to-batch variations of the demands of a specific pigment or latex type it is recommended that the formulator uses 1.5 - 2.0 times the determined optimum level of the dispersing agent.
- DeCAL 2075 has been successfully used to produce a wide range of aqueous slurries and dispersions. Suitable substrates include calcium carbonate, kaolin/china clay, dolomite, ferrite, magnesium hydroxide, mica, satin white, talc, titanium dioxide, zinc oxide etc.
Properties
- Formulation Type
- Physical Form
- Appearance
- Straw colored liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| pH | 7.5 | — | — |
| Solid Content | 35.0 | % | — |
| Viscosity (at 25°C, 20 rpm) | 300.0 | cps | Brookfield |
| Density (at 20°C) | 1.3 | g/cm³ | — |
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
DeCAL 2075 is supplied in 250 kg nett drums or 1200 kg IBC’s.
Storage & Handling
- Storage Condition
Although DeCAL 2075 is freeze stable, it is recommended to store the product at temperatures above 5°C to enable easy handling of the product.