Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Characteristics
- NMP-free, APEO-free
- Superior flexibility
- Soft, tough, flexible film
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low melting point (265ºF)
Applications & Uses
- Application Method
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Coating Type
- Suggested Uses
- HD-2001 DMM was designed for use in textile applications that require a soft hand coupled with very good strength, abrasion resistance, excellent adhesion, and excellent resiliency. Due to its overall properties, HD-2001 DMM can be used as a finish or a coating.
- This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. HD-2001 DMM is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance.
- The low melt temperature also allows HD-2001 DMM to be used as a heat seal coating. When properly formulated, HD-2001 DMM can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics.
- Application Method & Curing
HD-2001 DMM may be used as a sole vehicle or blended with acrylic emulsions. Viscosity modification can be made with associative thickeners for application by spray, knife-over-roll, or other methods.
Curing
Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. Do not use crosslinking agents for heat-seal coating applications.
Properties
- Physical Form
- Physical Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | 8.9 | lb/gal | — |
pH | 7.5 - 10.0 | — | — |
Softening Point | 265.0 | ºF | — |
Solid Content | 34 - 36 | % | — |
Viscosity | 50 - 500 | cps | — |
VOC Content (As Supplied) | 129.0 | g/l | — |
Value | Units | Test Method / Conditions | |
Elongation (20 Inches/Minute) | 550.0 | % | — |
Modulus (100%, 20 Inches/Minute) | 500.0 | psi | — |
Modulus (200%, 20 Inches/Minute) | 900.0 | psi | — |
Modulus (300%, 20 Inches/Minute) | 1500.0 | psi | — |
Tensile Strength (20 Inches/Minute) | 4000.0 | psi | — |
Regulatory & Compliance
- Chemical Inventories
Packaging & Availability
- Regional Availability