Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Pigment Type
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Product Highlights
Ti-Pure™ R-104 has a unique surface treatment that causes it to have minimal effect on the melt flow properties of masterbatches. This allows the masterbatch producer to achieve high loadings in relatively low melt index resins and still have a melt processible material. The effects of Ti-Pure™ R-104 and Ti-Pure™ R-101 on melt index are shown in Table.
Pigment wt% 12 22 70 R-101 50 7.4 - - R-104 50 9.3 - - R-101 60 4 - - R-104 60 8.1 - - R-101 70 nil nil - R-104 70 5.4 10.2 - R-101 80 - - nil R-104 80 - - 10.6 While melt index is a good measure of relative performance, the method does not reveal much about actual process conditions. Capillary melt flow measurements fill this gap, allowing viscosity to be measured over the normal range of processing equipment. Figure 2 shows the profound reduction in viscosity that can be achieved with Ti-Pure™ R-104 in a 70% low density polyethylene masterbatch.
Melt Rheology of 70% TiO2 Masterbatch (12 MFI LDPE at 190°C)
Ti-Pure™ R-104 easily “wets” with the surface of the thermoplastics and can dramatically increase process rates during preparation of thermoplastic masterbatches in certain types of compounding equipment. A typical internal mixer power curve is shown in below figure, which compares Ti-Pure™ R-104 and Ti-Pure™ R-101 grades of titanium dioxide. It is apparent that cycle time reductions of up to 25% can be readily achieved.
Internal Mixer Power Curve (R-104 versus R-101 Standard)
Optical Properties
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Suggestions for Use
Ti-Pure™ R-104 is designed primarily for plastic applications. The properties of Ti-Pure™ R-104 are especially valuable where high concentrations of pigment are desired in thermoplastic masterbatches and where minimal effect is desired on melt flow. This, combined with the following, makes Ti-Pure™ R-104 a valuable asset to the color formulator.
Properties
- Color
- Physical Form
- Physical Properties
- General Properties
Opacity Strength High Undertone Tint Very Blue Dispersibility in (Thermoplastics) Excellent Dispersibility in (Dry Blending Operations) Excellent Effect on Melt Flow Minimal Lacing Resistance Excellent Weathering Resistance “Chalking” grade in PVC use
Value | Units | Test Method / Conditions | |
TiO₂ Content | min. 97 | wt% | — |
Alumina Content | max. 1.7 | wt% | — |
Organic Treatment (Carbon) | 0.3 | wt% | — |
Specific Gravity | 4.2 | — | — |
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
Ti-Pure™ R-104 rutile titanium dioxide is available in two recyclable package types to meet your needs:
- 25 kg polyethylene bags
- 1 metric ton (1,000 kg) flexible intermediate bulk containers