Products

Ti-Pure™ R-350 is designed to exceed today’s expectations for titanium dioxide and set tomorrow’s standard in plastic formulations. This product is intended for formulators looking for a single grade of TiO2 with performance suitable for a wide range of plastic end uses. It provides a matchless combination of excellent dispersion and processing, minimal volatile content, minimal interaction with polymer additives, durability, and the brightness that only chloride-produced rutile TiO2 can provide. This product is the only TiO2 available that can offer such an exceptional set of properties.

JetFil® V625C is an extremely platy, fine talc product that is beneficiated to maximize stiffness, HDT, and dimensional stability in plastics applications. The particle size distribution and top size of this product are engineered and controlled to provide maximum impact strength and the best balance of stiffness and impact resistance. JetFil® V625C is compacted to enhance compounding throughput and reduce dust generation.

Boratherm™ SA 0700 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

JetFil® 575P is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

MINBLOC® MC-101 belongs to the MINBLOC® MC series of antiblocking additives that are produced from an inert, naturally occurring alpha quartz with a unique surface morphology. With nearly the same refractive index as the barefoot resins, MINBLOC® MC grades are ideal for PET, LLDE, LDPE, and other clear or opaque resin and film applications.

JetFil® M600 is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

Mistroblock 6HT-6HTC is a bright, micro-lamellar talc with a finer size distribution compared to our standard Mistroblock® HT product, developed specifically for polyolefin film anti-blocking applications. It provides very good mechanical film properties with a minimum impact on film haze and clarity. Mistroblock® 6HT is surface modified for reduced interaction with processing aids and improved dispersion in masterbatch applications. Mistroblock® 6HTC is compacted to maximize extrusion throughput and minimize dust generation.

Mistroblock 6H-6HC is a bright, micro-lamellar talc with a finer size distribution compared to our standard Mistroblock® H product and was developed specifically for polyolefin film anti-blocking applications. It provides very good mechanical film properties with a minimum impact on film haze and clarity. Mistroblock® 6HC is the compacted form of Mistroblock® 6H and is recommended for maximum extruder throughput and minimum dust formation.

TYTAN™ AP20 is primarily designed to strongly increase adhesion of solvent based inks to a variety of plastics used for food packaging or other purposes, but also pigment distribution and heat sealing resistance are improved allowing perfect hiding power and appearance of printing on otherwise problematic substrates.

JetFil® M700c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

MINBLOC® HC 1400 is a unique and distinctive combination of particle morphology, surface chemistry, and refractive index. MINBLOC® HC additives deliver excellent antiblocking performance and superior haze, gloss, and clarity values in packaging-grade flexible films without diminishing critical structural or mechanical properties.

JetFil® 700D is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is densified for reduced dust and ease of dispersion in low-shear extruders.

JetFil® M700 is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® V575C is a high-purity, extremely platy, fine talc product that is beneficiated to maximize stiffness, HDT and  dimensional stability in plastics applications. The particle size distribution and top size of this product are engineered and controlled to provide maximum impact strength and the best balance of stiffness and impact resistance. JetFil® V575C is compacted to enhance compounding throughput and reduce dust generation.

MINBLOC® HC 2000 is a unique and distinctive combination of particle morphology, surface chemistry, and refractive index. MINBLOC® HC additives deliver excellent antiblocking performance and superior haze, gloss, and clarity values in packaging-grade flexible films without diminishing critical structural or mechanical properties.

Mistroblock 1HT-1HTC is a bright, micro-lamellar talc with the finest size distribution among the Mistroblock® products to maximize clarity and provide a minimum effect on haze. It is developed specifically for polyolefin film anti-blocking applications with excellent mechanical film properties. Mistroblock® 1HT is surface modified for reduced interaction with processing aids and improved dispersion in masterbatch applications. Mistroblock® 1HTC is the compacted form of Mistroblock® 1HT and is recommended for maximum extruder throughput and minimum dust formation.

Cytron TBC is a non-toxic plasticizer widely used in PVC and cellulose derivatives. It can be applied in food-contact materials, such as plastic wrap, containers, films, or printing inks. It is a safe alternative to plasticizers in children's toys and medical devices, such as tubing, gloves, bandages, and patches. It can also be used as an emollient for personal care products.

JetFil® P200 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P200 could also help in achieving good long-term thermal stability (heat aging).

JetFil® 575P-575C is an off-white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is available in compacted form (JetFil® 575C) for maximum extruder throughput, minimum dust, and improved dispersion.

Boratherm™ SA 0020 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

JetFil® 700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® H290 is an off-white talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polypropylene applications to achieve maximum stiffness at loading levels as high as 20%, 40%, or higher. It is commonly used in wood-plastic composites (WPC).

JetFil® V390 is an extremely platy, coarse talc product that is beneficiated to maximize stiffness, HDT, and dimensional stability in plastics applications. The particle size distribution and top size of this product are engineered and controlled to provide maximum impact strength and the best balance of stiffness/impact resistance.

JetFil® P150 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P150 could also help in achieving good long-term thermal stability (heat aging).

TYTAN™ APZ900 is a zirconium complex with α-hydroxy acid ester that can be used as an adhesion promoter for printing, crosslinker for paints and as a catalyst for esterification. Due to its chelated structure, TYTAN™ APZ900 shows a delayed reaction at ambient temperature and thus facilitates the storage stability of inks. Compared with organo-titanate adhesion promoters, it shows good compatibility with PVB, CAB, and CAP inks and provides minimal discoloration during the sterilizing process in the printing of milk pouches.

JetFil® 575C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® T390 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetWhite 7D is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

MINBLOC® MC-151 belongs to the MINBLOC® MC series of antiblocking additives that are produced from an inert, naturally occurring alpha quartz with a unique surface morphology. With nearly the same refractive index as the barefoot resins, MINBLOC® MC grades are ideal for PET, LLDE, LDPE, and other clear or opaque resin and film applications.

JetFil® M600c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

JetFil® H590 is an off-white talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polypropylene applications to achieve maximum stiffness at loading levels as high as 20%, 40%, or higher. It is commonly used in wood-plastic composites (WPC).

Boratherm™ SA 0080 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

JetFil® T590 is an off-white, extremely platy, fine talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

Ti-Pure™ R-104 is a rutile titanium dioxide pigment manufactured by the chloride process. It is supplied as a fine, dry, white powder and is specifically designed to give outstanding melt flow with highly loaded thermoplastic masterbatches. Ti-Pure™ R-104 combines high tint strength with a blue undertone. This product offers excellent lacing resistance in high-temperature extrusion coating and cast film applications.