Products

HIFILL® 3 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® N 1000 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

DCL AG522 Red Brown Satin, 5 - 25 m is a reddish-shaded brown pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL AG153 Flashing Silver, 10 - 25 m is a silver-white transulcent pearlescent pigment with a glittery finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

Mistron® 554 is an off-white, high-purity, platy-fine talc. Its platy nature improves barrier properties, corrosion resistance, and stain blocking ability in architectural and industrial primers. Mistron® 554 is also used in topcoats to reduce hard settling, improve sag resistance, and extend prime pigments.

HIFILL® N 800 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

Nicron® 353 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 353 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. Nicron® 353 is also used for rheology and film reinforcement in adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applications.

Ultrablue® 7125, PB.29 (FG-75, 6302) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

MistroFoam is a lower-brightness, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

HIFILL® Air Floated Clay Filler 18 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Nicron® 554 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 554 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 554 is also used in paints to improve sag resistance and maximize prime pigment extension.

Nicron® 403 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 403 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 403 is also used in paints to improve sag resistance and maximize prime pigment extension. Nicron® 403 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

HIFILL® Air Floated Clay Filler 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Ultrablue® 3010, PB.29 (C-84) is an ultramarine blue pigment with low sulfur and moisture content. It is FDA-approved (Section 178-3297) and exhibits goo resistance properties, lightfastness, weather fastness, and heat stability. UltraBlue 3010 is highly versatile and suitable for use in a wide range of applications, such as coatings, plastics, paper, and rubber.

DCL AG123 Fine Satin Silver, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

Ultrablue® 3111, PB.29 (F-36, 6308) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

DCL AG302 Satin Gold, 5 - 25 m is a gold transulcent pearlescent pigment with a satin finish and is FDA approved (Section 178-3297). This pigment finds major applications in the following: Plastics such as PVC, PP. PS, PE and PET. Powder and industrial coatings. UV and offset inks Rubber products

Minex® IG-35 is an industrial-grade functional filler and extender that adds performance and value across a broad spectrum of applications. In coating formulations, this material imparts many of the benefits of micronized Minex® grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control.

DCL AG500 Bronze, 10 - 60 m is a bronze pearlescent pigment with a brilliant finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

Calford® H-780 is an aqueous dispersion of clays, metallic soaps, and additives. It can be used as an anti-stick agent for rubber. This product is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200).

Minex® IG-40 is an industrial-grade functional filler and extender that adds performance and value across a broad spectrum of applications. In coating formulations, this material imparts many of the benefits of micronized Minex® grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control.

Nicron® 604 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 604 is also used in paints to improve sag resistance and maximize prime pigment extension.

Ultrablue® UPV5, PV.15 (V-5, 5011) is a low sulfur, low moisture ultramarine violet pigment. This product is mainly used in the following applications: Plastics such as PVC, PP, PS and PE. Powder and industrial coatings. Rubber and paper products Cosmetics applications

Ultrablue® 8125, PB.29 (FCP-H type) is a low sulfur, low moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

Blachford Aluminum Stearate 300F is a high-quality, tallow-based aluminum stearate product that finds wide use in multiple applications, including suitability for FDA 21 CFR indirect food applications. 300F grade consists of di-stearates and has excellent gel properties for improved pigment suspension and flow control.

DCL AG351 Glitter Gold, 20 - 80 m is a gold translucent pearlescent pigment with a glittery finish. This product is composed of a mixture of titanium, mica, and iron oxide that takes on the appearance of a gold powder, and is approved by the FDA under Section 178-3297.

Blachford Aluminum Stearate 400F is a high-quality, tallow-based aluminum stearate product that finds wide use in multiple applications, including suitability for FDA 21 CFR indirect food applications. 400F grade is a tri-stearate and offers a lower melting point and higher free fatty acid content than 200F and 300F.

JetFil® M550 is a high-purity, platy, ultra-fine talc, which is recommended for improving stiffness, HDT, and dimensional stability in polymers. It can be used in polyethylene, polypropylene, and PVC-based applications to achieve maximum stiffness at loading levels up to 40% or higher. JetFil® M550 is available in densified form to improve feeding, enhance extrusion throughput, and reduce dusting.

Ultrablue® 2610, PB.29 (F-37, 5007, 6177) is a low sulfur, low moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic, paper, rubber, and coating applications.

Suprafino H USP is a functional mineral that can be used in a range of applications such as industrial markets, food, and pharmaceuticals. Talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite make up the majority of its composition. The product is odorless and has a white or off-white to light gray color.

DCL AG401A Luster Black, 10 - 60 m is a silver gray translucent pearlescent pigment that boasts a brilliant finish, and it is approved by the FDA under Section 178-3297. The mixture that comprises this pigment is made up of mica, titanium dioxide, and carbon black, resulting in a silver gray powder as its appearance.

ACCESS® Organosilane AE 301 is a diamino-functional silane that acts as a versatile coupling agent. It is widely used to enhance flexibility, elongation, and adhesion between inorganic surfaces and polymers. The product is equivalent to commercial products like SilquestTM A-1122, Dynasylan® DAMO, and DowsilTM Z-6094. During hydrolysis, AE 301 releases small amounts of methanol.

ACCESS® SFR OH 2,000 is a polyether-based superplasticizer designed to improve the workability and flow of concrete mixtures. This product is specifically formulated to reduce the water-to-cement ratio, resulting in improved compressive strength and durability of the final product. By increasing the fluidity of the mixture, ACCESS® SFR OH 2,000 also helps to reduce the risk of cracking and segregation in the concrete.

Minex® IG-16 is an industrial-grade functional filler and extender that adds performance and value across a broad spectrum of applications. In coating formulations, this material imparts many of the benefits of micronized Minex® grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control.

Minex® IG-56 is an industrial-grade functional filler and extender that adds performance and value across a broad spectrum of applications. In coating formulations, this material imparts many of the benefits of micronized Minex® grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control.

Minex® IG-25 is an industrial-grade functional filler and extender that adds performance and value across a broad spectrum of applications. In coating formulations, this material imparts many of the benefits of micronized Minex® grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control.