Products

Sunshield™ Clean Coat 3800 is a pure 100% acrylic emulsion latex coating that creates a hard, abrasion resistant film flexible enough to allow the coating to move with an elastomeric undercoat. Sunshield 380 is designed to be an ultra-durable top coat over masonry, stucco, con- rete, dry wall, and properly primed metal and wood. It is also de signed for use over elastomeric roof, wall, and deck coatings, as well as asphalt shingles and mineral surface cap sheets. Because of its hardness, it is recommended as a top coat over elastomeric coatings, which tend to pick up dirt. Sunshield 3800 stays clean and resists mi- crobial growth.

Acrylastic™ 490 Wall Coating was developed in 1983 to be a high- build, decorative, extremely flexible, high performance waterborne water proof wall coating that provides long- term protection and beauty over a variety of interior and exterior surfaces.

Roofseal Tropical Roof Coating is a bright white, ultra-tough, waterproofing, copolymer elastomeric coating. The system creates a liquid-applied roof that is permanent, seamless, fully- adhered, and watertight. Tropical Roofseal's high solar reflectance will reduce thermal- mechanical stress and cooling loads.

Roofseal 500S Acrylic Elastomeric Roof Coating is a bright white, ultra-tough, waterproofing, copolymer elastomeric coating. The system creates a liquid-applied roof that is permanent, seamless, fully-adhered, and watertight. Roofseal 500S's high solar reflectance will reduce thermal-mechanical stress and cooling loads.

Acrylastic™ 810 White Mastic is a extra tough, flexible, tenacious, and durable white mastic membrane, based on Davlin's world renowned Capseal formula. Acrylastic 810 is user friendly and can be applied using a brush, putty knife, or trowel, and its high pigment level provides superior hiding power. It is tough, durable, ultra elastic. It has wide range of compatibility and is easy to apply.

Roofseal Silicone Top is a ready-to use, high solids, solvent free, single compo- nent, moisture cure, fluid applied silicone coating. Creates a breathable membrane possessing superior weathering and water resistance characteristics. Provides elemental protection for architectural surfaces such as vertical wals, masonry, concrete, metal, single ply membranes and sprayed-in-place urethane foam systems. This product can be used as a topcoat over polyurethane elastomeric base coats where improved traffic and impact resistant characteristics are required.

Acrylastic™ 600 Deck Coating is a durable, water- base, single component, highly elastic water and weather resistant deck coating. The Acrylastic 600 system is based on superior tech- nology that has a proven track record since 1983. Davlin's proprietary formulation ensures complete UV stability and long-standing weather-ability.

Davlin Coatings Capseal 800 Roofing Mastic Sealer is a specially formulated, highly flexible, acrylic modified waterborne emulsion used to seal asphalt on parapet walls, flashing, and repair details.

Acrylastic™ UltraRoof™ 900 is an ultra-tough, super-waterproofing, alkali-resistant, copolymer elastomeric coating. Davlin's proprietary Acrylastic system has a proven track record since 1983.

Acrylastic™ UltraRoof™ 510 was designed as a single-part water-based coating with the highest performance in coastal temperate, humid, hot, and extreme alkaline environments. Acrylastic 510 creates a tough, long lasting protective membrane that remains flexible over time even under adverse conditions. Its elongation and tensile strength provide unsurpassed resistance to maintenance traffic, weather conditions, and wear. Its proprietary formula features copolymer elastomeric resins to produce a seamless, flexible, durable membrane that displays exceptional weatherability and UV resistance. Because it is a high-solids coating, Acrylastic 510 has low shrinkage, allowing it to bridge hairline cracks and provide protection against new cracks forming.

Davlin Coatings Rubber Seal is a weatherproof membrane over a multitude of surfaces.

Davlin Coatings Acryflex 1210 Sealant is a butyl rubber modified acrylic terpolymer latex caulking sealant designed for use over surfaces requiring elastomeric properties, especially, On cracked, uneven or unsightly surfaces and, To level out voids and low areas on decks/roofs.