Products

Designer Molecules CS-697 is a polyglycidyl ether cyclosiloxane monomer. The structure above shows a representation of the predominant component. Low viscosity and low color make it ideal for formulating adhesives. This resin is very compatible with most organic resins.

Designer Molecules BMI-1500 is an amorphous, low molecular weight bismaleimide oligomer that exhibits good adhesion to a variety of substrates. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. The material has excellent low pH hydrolytic resistance and thermal stability. The amorphous nature of this imide-extended BMI allows it to form room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in many common solvents such as toluene, xylene, MIBK, etc. .

Designer Molecules BMI-1700 is an amorphous, low molecular weight bismaleimide oligomer that exhibits good adhesion to a variety of substrates. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. The material has excellent low pH hydrolytic resistance and thermal stability. The amorphous nature of this imide-extended BMI allows it to form room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in most aromatic and aliphatic solvents such as toluene, xylene, NMP, etc.

Designer Molecules U-835 is a urethane resin functionalized with an acrylate and a methacrylate. This low viscosity urethane makes it an ideal candidate for a base resin in an adhesive formulation. The urethane linkages help to form a very tough cross-linked film with excellent adhesion on a variety of substrates including metal, polyimide, silicon, and ceramic. The acrylate/methacrylates curable ends make it ideal for both thermal cure via peroxides or UV cure through photo initiators.

Designer Molecules Peam-1044 is a polyester acrylate/methacrylate that exhibits excellent adhesion, low warpage, and hydrophobicity. The oligomer has very high thermal stability and low volatility. It can be used as a base resin in a formulation or an additive.

Designer Molecules Peam-645 is a polyester acrylate/methacrylate that exhibits low CTE, high Tg, and high modulus. The oligomer has very high thermal stability and low volatility. It can be used as a base resin in a formulation or as an additive. It exhibits good adhesion on various substrates. The oligomer also exhibits good hydrolytic stability. .

Designer Molecules PEM-665 is a methacrylate terminated polyester oligomer that has low color and low cure shrinkage. The backbone of this product consists of a statistical distribution of low molecular weight polyester segments. A representative structure is shown above. The cycloaliphatic dibasic ester residues as well as the methacrylate end-groups resist hydrolysis. This oligomer has approximately 33% less cure shrinkage than BisGMA at 100% conversion. Unlike BisGMA, it is not based upon a bisphenol A backbone and therefore does not have the potential to act as an endocrine disruptor.