Products

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron VT 920 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 920 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazings, wood- and fur­niture lacquers, printing inks and industrial finishes (air-drying and stoving enamels).In comparison with powdery matting agents Deuteron MM 677 particularly offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability.The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. back

Deuteron VT 930 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 930 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effectiveness.Application Water-based clear lacquers and top coats where the presence of PTFE can be accepted, e.g. air drying and stoving enamels, aqueous acrylic lacquers and inks. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron ND 953 helps to prevent the uncontrollable increase in viscosity which can arise in presence of certain pigments and fillers in heavily-filled aqueous systems. The required rheological properties of the paint or coating material can be obtained just through the character of the used binder or by addition of a suitable thickener.The presence of Deuteron ND 953 improves the storage stability. Unwelcome thickening during storage will be avoided or limited.Deuteron ND 953 is used in aqueous paints and coating materials, e.g. masonry paints, fillers, aqueous primers, water-based bituminous emulsions. The product is also suitable for use in water-based pigment preparations. It is most effective in presence of inorganic pigments and fillers. back

The use of Deuteron OG 250 affects the surface characteristics of aqueous coating systems.The low melting point of the used paraffine-wax reduces unwelcome high slipperiness of certain binders (dispersions). Because of this property the product is also suitable as an additive to produce water-based „soft-feeling-lacquers“. On the other hand the use of Deuteron OG 250 can increase the slipperiness of coatings, when the properties imparted by the used binder are not satisfactory.Application Aqueous finishing lacquers, packing lacquers, printing inks and aqueous wood stains. „Soft-feeling-lacquers“ for industrial application (combined with matting plastic Deuteron MK). back

The presence of Deuteron VT 819 prevents the settling of pigments/extenders and the separation of the liquid phases during the storage in aqueous systems such as emulsion paints and plasters. The applicability of the paints will be improved. Deuteron VT 819 is compatible with most binders and thickeners which are customary in the paint industry.Deuteron VT 819 is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. The product has no tendency to form lumps. Solutions can be produced with a simple stirrer. The use of a high shear rate is not necessary. The product‘s easy solubility is only given when it is incorporated into systems with a pH-value ranging between neutral and alkaline.When the solution is prepared, its pH-value can be adjusted towards an acidic pH-value.Application Aqueous primers, emulsions paints, adhesives, dispersion plasters, printing inks, silicate paints, aqueous preparations of pigments and fillers. back

Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities.Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron SO 302 is a dispersion of an elastomer in water corresponding to Deuteron SO 300, however with considerably larger particle size distribution. It lends the coating a rough, softtouch- surface. It is not required to use specialized „soft types“ as binders. At the same time, it acts as a matting agent. back

Deuteron SO 300 is a fine dispersion of an elastomer in water. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is temperature resistant up to 160 °C.The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the recoatability.In 2-component lacquers, the inherent OH-functionality allows the product to be cross-linked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting.Application Deuteron SO 300 is intended for all water-based lacquers, coatings and printing inks which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. back

Deuteron VT 910 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 910 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

For aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations.Especially well suited for the building and do-it-yourself sectors. Wherever high viscosity and pseudoplastic behavior are required but high-performance stirring devices, such as dissolvers, are not available.In pigmented aqueous systems, such as dispersion paint and cast, the use of Deuteron VT 856 prevents a deposition of the pigments and fillers as well as a separation of the liquid phase during storage. The applicability of the coating materials is improved. The product is compatible with most binding and thickening agents commonly used in the paint industry. When properly used, Deuteron VT 856 allows the preparation of highly viscous systems without technical help. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

For aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations.Especially well suited for the building and do-it-yourself sectors. Wherever high viscosity and pseudoplastic behavior is required but high-performance stirring devices, such as dissolvers, are not available.In pigmented aqueous systems, such as dispersion paint and cast, the use of Deuteron VT 855 prevents a deposition of the pigments and fillers as well as a separation of the liquid phase during storage. The applicability of the coating materials is improved. The product is compatible with most of binding and thickening agents commonly used in the paint industry. When properly used, Deuteron VT 855 allows the preparation of highly viscous systems without technical help. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

In aqueous systems, such as emulsion paints and plasters, the use of Deuteron XG prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is compatible with most binders and thickeners which are customary in the paint industry.Deuteron XG is insoluble in most organic liquids. The product is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. Pre-wetting of Deuteron XG with glycols at a ratio of 1 : 1 accelerates the swelling- and dissolution process. Aqueous solutions of Deuteron XG show a high pseudoplasticity. High rate of shear lowers the viscosity. Reducing the shear rate increases viscosity again. Solutions of Deuteron XG are stable regarding the pH-value and temperature. There is almost no change in stability from pH 2 – 12. The temperature hardly has any influence on the viscosity of a preparation with Deuteron XG.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back