Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
- Chemical Description
Dispersion of an oil-based elastomer-copolymer in wate
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Applications
- Coating Type
- Ink & Toner Type
- Use Level
- 10-20%
- Applications
Deuteron SO 300 is intended for all water-based lacquers, coatings and printing inks which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas.
- Dosage
The optimum dosage is highly dependent on the binders used in the formulation as well as the desired surface characteristics and has to be determined by own trials. For initial experiments a dosage of approx. 10 - 20 % is recommended. Deuteron SO 300 is very compatible with coatings, therefore it is possible to use large dosages in order to achieve extreme effects.
- Processing
Deuteron SO 300 should be incorporated homogenously into the lacquer by stirrer. Foam generation should be avoided. The product should best be added slowly to the binder phase. Any shocks or spikes of water, solvent, or a large concentration should be avoided as well. The material should not be allowed to dry, because the resulting agglomerates are difficult to disperse. Any agglomeration has to be removed by sieving / screening the final system
Properties
- Physical Form
- Typical Properties
- Particle Size Distribution
Value | Units | Test Method / Conditions | |
Density | approx. 1.0 | g/cm3 | — |
Active Agent Content | approx. 45 | % | — |
Reactive Thinner | water | — | — |
Viscosity | approx. 100 | mPa.s | — |
OH-Content (based on solid Content) | approx. 2.1 | % | — |
Acid Value (based on solid Content) | approx. 15 | mg KOH/g | — |
Type / Chem. base | Elastomer | — | — |
Active Content | 45 | % | — |
Value | Units | Test Method / Conditions | |
Particle Size d50 | approx. 8 | µm | — |
Particle Size d90 | approx. 18 | µm | — |
d50 | 8.0 | µm | — |
d90 | 18.0 | µm | — |
Safety & Health
- Safety Regulations
According to Regulation (EC) No. 1272/2008 Deuteron SO 300 is not classified as a dangerous product and therefore does not need to be labeled.
Storage & Handling
- Shelf Life
- 12 Months
- Storage Conditions & Package Sizes
Deuteron SO 300 can be stored in tightly sealed containers for at least 12 months at room temperature. The product must be stored under frost-free conditions. It is recommended to stir the product before use.
- Plastic hobbock (30 kg net)
- Plastic drum (220 kg net)