company tower banner
Deuteron Company Logo

Deuteron VT 855

1 of 86 products in this brand
For aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations.Especially well suited for the building and do-it-yourself sectors. Wherever high viscosity and pseudoplastic behavior is required but high-performance stirring devices, such as dissolvers, are not available.In pigmented aqueous systems, such as dispersion paint and cast, the use of Deuteron VT 855 prevents a deposition of the pigments and fillers as well as a separation of the liquid phase during storage. The applicability of the coating materials is improved. The product is compatible with most of binding and thickening agents commonly used in the paint industry. When properly used, Deuteron VT 855 allows the preparation of highly viscous systems without technical help. back

Functions: Rheology Modifier, Thickener

End Uses: Waterborne Coating

Physical Form: Paste

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Technologies
Chemical Description

Anionic heteropolysaccharide (Xanthan Gum) in ethyllactate, stabilized

Applications & Uses

Coating Type
Use Level
0.1-2%
Applications

For aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations. Especially well suited for the building and do-ityourself sectors. Wherever high viscosity and pseudoplastic behavior is required but high-performance stirring devices, such as dissolvers, are not available.

Dosage

Depending on the requirements, 0,1 - 2,0 %, calculated on the basis of the water content.

Processing

The digestion of Deuteron VT 855 requires no great rate of shear; a careful addition under slight stirring is sufficient. On the other hand it is possible that may get included during processing with a dissolver which might then stabilizes during swelling. This must be taken into consideration. If stirring or dispersion devices are not available, it is possible to mix Deuteron VT 855 manually into the aqueous phase. It is recommended to fill in Deuteron VT 855 first and then add water bit by bit while stirring, just like in the preparation of a paste. The thickening effect of Deuteron VT 855 does not begin immediately, but with some delay. After a swelling time of 15 minutes and another stirring, the swelling of Deuteron VT 855 should be complete. If, due to improper circumstances, the swelling process should not be complete at that point of time, one can expect a satisfactory result after overnight storage and repeated agitation. In case of doubt, the optimal swelling time should be determined by means of a small manual test.

Properties

Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Solid Contentapprox. 40%-
Viscosityapprox. 5.000mPa.s-
Specific Weightapprox. 1.2g/cm3-
pH-Value of a 1 % solutionapprox. 6 - 7--
Flash Point61.0°C-
Type / Chem. baseXanthan--
Active Content40%-

Technical Details & Test Data

Conservation

Aqueous preparations of Deuteron VT 855 should be preserved when they are stored for more than 24 hours. Compatibility is given with preservatives which are customary in the paint industry.

Safety & Health

Safety Regulations

According to Regulation (EC) No. 1272/2008 Deuteron VT 855 is classified as a dangerous product and therefore needs to be labeled. F

Storage & Handling

Shelf Life
6 Months
Storage Conditions & Package Sizes

Deuteron VT 855 can be stored for at least 6 months at room temperature and dry conditions. An eventual slight fomation of serum in Deuteron VT 855 can be easily removed by stirring. For that purpose, shear force is not required. There is no sedimentation.Sheet steel hobbock (25 kg net)