Products

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers.Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion.Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent.Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron MM 682 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 682 can be used in a variety of applications, preferably in pigmented paints and lacquers.The matting effect induced with Deuteron MM 682 is highly resistant to mechanical influences („polishing“ or abrasion).Deuteron MM 682 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Deuterol 201 E is a defoaming dispersing agent for fillers and pigments in water soluble and water miscible primers and lacquers. The wetting effect of Deuterol 201 E in primers and one-coat lacquers, which are applied to badly degreased metal substrates, considerably improves the adhesion of the coating film to the metal substrate. The product also shows a defoaming effect in the manufacture as well in the processing of water dilutable systems. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

The use of Deuteron OG 250 affects the surface characteristics of aqueous coating systems.The low melting point of the used paraffine-wax reduces unwelcome high slipperiness of certain binders (dispersions). Because of this property the product is also suitable as an additive to produce water-based „soft-feeling-lacquers“. On the other hand the use of Deuteron OG 250 can increase the slipperiness of coatings, when the properties imparted by the used binder are not satisfactory.Application Aqueous finishing lacquers, packing lacquers, printing inks and aqueous wood stains. „Soft-feeling-lacquers“ for industrial application (combined with matting plastic Deuteron MK). back

Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications in varnishes and coatings.Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, radiation curing varnishes with the additional use of SiO2.With its favorable oil absorption value the product is predestinated for coatings with high flexibility, e.g. coil coatings and leather finishes. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back