Products

Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers.Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion.Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent.Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron MM 682 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 682 can be used in a variety of applications, preferably in pigmented paints and lacquers.The matting effect induced with Deuteron MM 682 is highly resistant to mechanical influences („polishing“ or abrasion).Deuteron MM 682 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications in varnishes and coatings.Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, radiation curing varnishes with the additional use of SiO2.With its favorable oil absorption value the product is predestinated for coatings with high flexibility, e.g. coil coatings and leather finishes. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back