company tower banner
Deuteron Company Logo

Deuteron MM 684

1 of 86 products in this brand
Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers.Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Functions: Flattener

End Uses: Powder Coating, Radiation Curable Coating

Labeling Claims: Biodegradable

Features: Chemical Resistance, Excellent Scratch Resistance

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Technologies
Chemical Description

Combination of organic and inorganic materials

Features & Benefits

Labeling Claims

Applications & Uses

Cure Method
Applications

Deuteron MM 684 is suited for all common coilcoating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers

Dosage

As a non-binding guiding value, a concentration of 3 % (referring to the total formulation) is recommended. Depending on the desired matting effect and the coating system, concentrations between 1 % and 8 % are common. The exact dosage should be determined by own trials.

Processing

Deuteron MM 684 is easily dispersible. Therefore strong shear forces are not required to incorporate the agent; a rapid mixer will be sufficient. The material is also suitable for a subsequent matting or correction of finished lacquer (pigmented or unpigmented).

Properties

Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Powder Densityapprox. 120g/l
Specific Weightapprox. 1.8g/cm3
Type / Chem. basePMU-Compound
Active Content100%
Particle Size Distribution
ValueUnitsTest Method / Conditions
Particle size d50approx. 6micron
Particle size d90approx. 13.3micron
d506.0µm
d9013.3µm

Safety & Health

Safety Regulations

According to Regulation (EC) No. 1272/2008 Deuteron MM 684 is not classified as a dangerous product and therefore does not need to be labeled. Due to the fine fractions of the product, measures for dust protection must be heeded and the build up of electrostatic charge must be avoided.

Storage & Handling

Shelf Life
24 Months
Storage Conditions & Package Sizes

Deuteron MM 684 can be stored for at least 24 months at room temperature and dry conditions.Paper bag (10 kg net)