Products

Deuteron UV RM15 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling.Application Radically curing 100 % UV-systems (solvent-free). back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron UV 1250 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1250.Deuteron UV 1250 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 1250 is soluble in these binder systems including common solvents and reactive diluents. back

Deuteron UV RM17 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling.Application Radically curing 100 % UV-systems (solvent-free). back

Deuteron LE 829 is designed to be used as an antistatic agent for polyurethane compounds based on polyester and polyether. These compounds are used in the production of soles with antistatic character as required by EN 344 or for special shoes for use in computing and medical areas.Deuteron LE 829 is of high polarity and thus noticeably reduces the electrical resistance of polyurethane-foams, even when used in small quantities. back

Deuteron WS imparts excellent mar resistance and improves anti-blocking of varnishes and coatings. The product is different to conventional products because it does not negatively influence the recoatability and has no tendency to „orange-peel“.Deuteron WS does not only improve the slip but also the leveling and gloss of the coating in several applications.Application Deuteron WS can be used in a wide range of solvent-based lacquers and coatings, particularly wood finishes, water dilutable systems, waterbased paper coatings, baking enamels. back

Deuteron UV RM19 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. Deuteron UV RM19 contains TMPEOTA, a more reactive base compared to our other UV RM-products.Application Radically curing 100 % UV-systems (solvent-free). back

Deuteron MM 659 reduces the gloss in above mentioned coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes.Spoiling of the transparency in UV-curing lacquers is not possible due to the favorable composition of Deuteron MM 659. The obtained coating surfaces show excellent resistance regarding burnishing and mar resistance. The use of Deuteron MM 659 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. A reaction between matting agent and lacquer system and therefore a spoiling of the storage stability has not been noticed. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back