Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Flame Rating
- UL 94 HB
- Filler
- Glass Fiber
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Tensile Modulus (1 mm/min) | 9200 / 5800 | MPa | ISO 527 |
| Tensile Stress at Break (5 mm/min) | 160 / 105 | MPa | ISO 527 |
| Tensile Strain at Break (5 mm/min) | 4.0 / 6.5 | % | ISO 527 |
| Flexural Strength (2 mm/min) | 250 / 150 | MPa | ISO 178 |
| Flexural Modulus (2 mm/min) | 8300 / 5200 | MPa | ISO 178 |
| Charpy Notched Impact Strength (+23 °C) | 18 / 35 | kJ/m2 | ISO 179/1eA |
| Charpy Unnotched Impact Strength (+23 °C) | 95 / 110 | kJ/m2 | ISO 179/1eU |
| Izod Notched Impact Strength (+23 °C) | 17 / 32 | kJ/m2 | ISO 180/1A |
| Izod Unnotched Impact Strength (+23 °C) | 85 / 100 | kJ/m2 | ISO 180/1U |
| Value | Units | Test Method / Conditions | |
| Melt Volume Rate - MVR (275 °C/5.0 kg) | 35 | cm3/10 min | ISO 1133 |
| Molding Shrinkage - Parallel (72 hrs, 23°C, 50% RH) | 0.3 - 0.5 | % | ISO 294-4 / 2577 |
| Molding Shrinkage - Transverse (72 hrs, 23°C, 50% RH) | 0.9 - 1.1 | % | ISO 294-4 / 2577 |
| Viscosity Number (96% H2SO4) | 145 | ml/g | ISO 307 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature - HDT/A (1.80 MPa) | 200 | °C | ISO 75 |
| Heat Deflection Temperature - HDT/B (0.45 MPa) | 215 | °C | ISO 75 |
| Melting Point (DSC) | 221 | °C | ISO 11357-1 |
| Vicat Softening Temperature (50°C/h - 50N) | 210 | °C | ISO 306 |
| Value | Units | Test Method / Conditions | |
| Comparative Tracking Index - CTI (Solution A) | 500 | V | IEC 60112 |
| Value | Units | Test Method / Conditions | |
| Flammability (0.8 mm) | HB | - | UL 94 |
| Value | Units | Test Method / Conditions | |
| Drying Time (with dew point of dried air < -30 °C) | 2.0 - 4.0 | h | - |
| Recommended Melt Temperature | 240 - 270 | °C | - |
| Recommended Mold Temperature | 90 - 120 | °C | - |
| Drying Temperature | 75 - 85 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability
- Regional availability
- Europe