Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Flame Rating
- UL 94 HB
- Filler
- Glass Fiber
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Parameters
Value | Units | Test Method / Conditions | |
Tensile Modulus (1 mm/min) | 23500 / 16000 | MPa | ISO 527 |
Tensile Stress at Break (5 mm/min) | 255 / 160 | MPa | ISO 527 |
Tensile Strain at Break (5 mm/min) | 1.5 / 2.5 | % | ISO 527 |
Flexural Strength (2 mm/min) | 390 / 275 | MPa | ISO 178 |
Flexural Modulus (2 mm/min) | 22000 / 16000 | MPa | ISO 178 |
Charpy Notched Impact Strength (+23 °C) | 15 / 20 | kJ/m2 | ISO 179/1eA |
Charpy Notched Impact Strength (-30°C) | 10 / 10 | kJ/m2 | ISO 179/1eA |
Charpy Unnotched Impact Strength (+23 °C) | 80 / 90 | kJ/m2 | ISO 179/1eU |
Charpy Unnotched Impact Strength (-30°C) | 75 / 75 | kJ/m2 | ISO 179/1eU |
Izod Notched Impact Strength (+23 °C) | 15 / 19 | kJ/m2 | ISO 180/1A |
Izod Unnotched Impact Strength (+23 °C) | 75 / 80 | kJ/m2 | ISO 180/1U |
Value | Units | Test Method / Conditions | |
Molding Shrinkage - Parallel (72 hrs, 23°C, 50% RH) | 0.1 - 0.3 | % | ISO 294-4 / 2577 |
Molding Shrinkage - Transverse (72 hrs, 23°C, 50% RH) | 0.2 - 0.4 | % | ISO 294-4 / 2577 |
Moisture Absorption (T=23°C / 50%RH) | 0.9 | % | ISO 62 |
Water Absorption (T=23°C / sat.) | 3 | % | ISO 62 |
Viscosity Number (96% H2SO4) | 125 | ml/g | ISO 307 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature - HDT/A (1.80 MPa) | 215 | °C | ISO 75 |
Heat Deflection Temperature - HDT/B (0.45 MPa) | 220 | °C | ISO 75 |
Melting Point (DSC) | 221 | °C | ISO 11357-1 |
Vicat Softening Temperature (50°C/h - 50N) | 210 | °C | ISO 306 |
Value | Units | Test Method / Conditions | |
Comparative Tracking Index - CTI (Solution A) | 500 | V | IEC 60112 |
Value | Units | Test Method / Conditions | |
Flammability (1.5 mm) | HB | UL 94 | |
Glow Wire Flammability Index - GWFI (1 - 3 mm) | 650 | °C | IEC 60695-2-12 |
Value | Units | Test Method / Conditions | |
Drying Time (with dew point of dried air < -30 °C) | 2.0 - 4.0 | h | - |
Recommended Melt Temperature | 260 - 290 | °C | - |
Recommended Mold Temperature | 90 - 100 | °C | - |
Drying Temperature | 75 - 85 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability
- Regional availability
- Europe