

DuPont
Delrin® 150 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 2900.0 - 2900.0 MPa
Delrin® 150 NC010 is a high viscosity acetal homopolymer specifically designed for extrusion processes. It has excellent thermal stability, low die deposit, and enhanced crystallization for low porosity.


DuPont
Kalrez® Spectrum™ 6375
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats
Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant
End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump
Color: Black
Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.


DuPont
Delrin® 100 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.


DuPont
Kalrez® Spectrum™ 7075
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats
Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant
End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts
Color: Black
Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.


DuPont
Delrin® 100P NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.


DuPont
Hytrel® 6356
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1220.0 - 1220.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 290.0 - 290.0 MPa
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.


DuPont
Hytrel® 7246
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding
End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord
Density: 1260.0 - 1260.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 550.0 - 550.0 MPa
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.


DuPont
Hytrel® 5556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 190.0 - 190.0 MPa
Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.


DuPont
Hytrel® 4556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films
Density: 1140.0 - 1140.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 87.0 - 87.0 MPa
Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.


DuPont
Delrin® SC698 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Flexural Modulus: 3000.0 - 3000.0 MPa
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect.


DuPont
Hytrel® 3078
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications
Density: 1070.0 - 1070.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 27.0 - 27.0 MPa
Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.


DuPont
Delrin® 577 BK000
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Flexural Modulus: 4600.0 - 4600.0 MPa
Delrin® 577 is a medium viscosity acetal homopolymer (Polyoxymethylene POM) containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature. It contains carbon black for improved weathering.


DuPont
Hytrel® 8238
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1280.0 - 1280.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 1150.0 - 1150.0 MPa
Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.


DuPont
Zytel® 70G30HSLR BK099
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 - 9000.0 MPa
Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.


DuPont
Hytrel® 5526
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Injection Molding
End Uses: Cosmetic Packaging, Appliances, Thermoforming Applications, Automotive Applications, Electrical/Electronic Applications, Office Automation Equipment, Bearings
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 200.0 - 200.0 MPa
Hytrel® 5526 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It is specially recommended for injection molding applications requiring high flow properties.Typical applications:Seals, packing and gaskets; gears and bearings.


DuPont
Delrin® FG911DP NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3300.0 - 3300.0 MPa
Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.


DuPont
Delrin® FG500MXD BLA090
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 3400.0 - 3400.0 MPa
Delrin® FG500MXD is a metal- and X-ray-detectable medium viscosity acetal homopolymer for injection molding and extrusion. It has been developed for applications in contact with food. Detection limits need to be determined as a function of the detector and other process variables.


DuPont
Delrin® 500T BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.


DuPont
Zytel® HTN52G35HSL BK083
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/66 (PA 6T/66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 10300.0 - 10300.0 MPa
Zytel® HTN52G35HSL BK083 is a 35% glass-reinforced, heat stabilized, lubricated high performance polyamide resin that can be molded in water heated molds. It is also a PPA resin.


DuPont
Crastin® ST820 NC010
Polymer Name: Thermoplastic Polyester, Polybutylene Terephthalate (PBT)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding, Coating
Additives Included: Mold Release Agent
Flexural Modulus: 1550.0 - 1550.0 MPa
Crastin® ST820 NC010 is an unreinforced, Super Tough polybutylene terephthalate resin for injection molding.


DuPont
Hytrel® 4056
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Cosmetic Packaging, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment, Wire & Cable Applications, Hoses
Density: 1160.0 - 1160.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 60.0 - 60.0 MPa
Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, beltingand seals,.


DuPont
Hytrel® G4074
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Electrical/Electronic Applications, Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing
Density: 1180.0 - 1180.0 kg/m³
Strain at Break: 250.0 - 250.0 %
Flexural Modulus: 65.0 - 65.0 MPa
Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.


DuPont
Kalrez® 0090
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings, Valve Seats
Features: High Modulus, Durable, Good Thermal Stability, High Hardness, Chemical Resistant
End Uses: Semiconductor Applications, Pump Parts, Valves, O Rings, Valve Parts
Color: Black
Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).


DuPont
Delrin® 500CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.


DuPont
Delrin® FG111DP NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3000.0 - 3000.0 MPa
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® FG111DP is a high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.


DuPont
Delrin® 311DP NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3100.0 - 3100.0 MPa
Delrin® 311DP is a medium-high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids.


DuPont
Delrin® 100ST BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 1100.0 - 1100.0 MPa
Delrin® 100ST BK602 is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.


DuPont
Delrin® 500T NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.


DuPont
Delrin® 300CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 300CPE (DE20732) is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® 300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.


DuPont
Zytel® 70G50HSL NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 16000.0 - 16000.0 MPa
Zytel® 70G50HSL NC010 is a 50% Glass Reinforced, Heat Stabilized, Polyamide 66 Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be colored. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.